Texas Instruments TI-89 Manual Book page 396

Transmitting the ID
List to a Computer
Clearing the ID List
After all the IDs are collected onto one calculator, use the
software and a computer-to-calculator cable (available
LINKé
separately) to store the ID list on a computer. The ID list can then be
sent as an e-mail attachment, or it can be printed and faxed or mailed
to Texas Instruments.
For complete instructions on how to transmit an ID list from a
to a computer, refer to the
TI-89 / TI-92 Plus
guidebook. The general steps are:
1. Connect the cable to the computer and to the calculator that
contains the ID list.
2. Start the
TI-GRAPH LINK
3. Display the Home screen on the calculator. Press:
: "
TI.89
: ¥ "
TI.92 Plus
4. In the
TI-GRAPH LINK
menu.
5. Select a directory on the computer in which to store the ID list
and record this location for future reference.
6. Click OK to store the ID list on the computer's hard drive.
The ID list remains on the collection calculator until you either clear
it or send it to another
The ID list remains on the collection calculator after it is uploaded to
the computer. You can then use the collection calculator to upload
the list to other computers.
To clear the ID list from the collection unit:
1. Press 2 ° to display the
2. Press ƒ
and select
Manage
TI-GRAPH LINK
software on the computer.
software, select
Get ID List
.
TI-89 / TI-92 Plus
VAR-LINK
.
A:Clear ID List
Chapter 22: Linking and Upgrading
TI-GRAPH
from the
Link
screen.
379