Texas Instruments TI-89 Manual Book page 375

Creating a New
Folder
Copying or Moving
Variables from One
Folder to Another
Tip: To copy a variable to a
different name in the same
folder, use § (such as
a1! a2) or the CopyVar
command from the Home
screen.
Renaming Variables
or Folders
Locking or
Unlocking Variables
Folders, or Flash
Applications
358 Chapter 21: Memory and Variable Management
For information about using folders, refer to Chapter 5.
, press ƒ
1. On
VAR-LINK
2. Type a unique name, and
press ¸ twice.
You must have at least one folder other than
to copy variables within the same folder.
VAR-LINK
1. On , select the variables.
VAR-LINK
2. Press ƒ
Manage and select
3. Select the destination folder.
4. Press ¸.
The copied or moved
variables retain their
original names.
Remember, if you use † to select a folder, the variables in that
folder are selected automatically. As necessary, use † to deselect
individual variables.
1. On , select the variables and/or folders.
VAR-LINK
2. Press ƒ
and select
Manage
3. Type a unique name, and
press ¸ twice.
If you selected multiple items,
you are prompted to enter a
new name for each one.
When a variable is locked, you cannot delete, rename, or store to it.
However, you can copy, move, or display its contents. When a folder
is locked, you can manipulate the variables in the folder (assuming
the variables are not locked), but you cannot delete the folder. When
a Flash application is locked, you cannot delete it.
1. On , select the variables and/or folders, or Flash
VAR-LINK
application.
2. Press ƒ
and select
Manage
Πindicates a locked variable,
folder, or Flash application in
û indicates an archived variable,
which is locked automatically.
and select
Manage 5:Create Folder
MAIN
2:Copy or 4:Move .
.
3:Rename
or .
6:Lock 7:UnLock
RAM
.
. You cannot use