Texas Instruments TI-89 Manual Book page 22

Localizing the
TI-89 / TI-92 Plus
Note: Until you complete
the localization process, the
Select a Language dialog
box will reappear when you
turn the unit on.
1. Press the cursor keys (D or C) to
move the pointer to the language in
which you would like to set your
. (The list of
TI-89 / TI-92 Plus
languages on your calculator may
vary from this example.)
2. Press ¸ to set the
(Pressing N halts the localization process and displays the
Home screen.)
3. Read the message that appears and
then press ¸.
The message displays in the
language you previously selected.
4. Press the cursor keys (D or C) to move the pointer and then
press ƒ to select each additional language that you would like to
keep.
— or —
Press „ to select and keep all of the language applications.
You cannot uncheck English or the
language you selected in step 1.
Pressing ƒ toggles the Ÿ on and off.
5. Press ¸ to complete the localization process. Additional
selected languages, if any, are retained in memory and unselected
languages are deleted to free up Flash memory. (Pressing N
halts the localization process and displays the Home screen.)
If additional language applications remain on your
you can change the localization language via
dialog box. See "Setting Modes" in Chapter 2 for information on how
to use the dialog box. You can add or delete language and other
Mode
Flash applications via the
Variables, Flash Applications, and Folders" in Chapter 22.
Language applications are available on the enclosed CD and from the
Texas Instruments web site. For up-to-date information about Flash
applications, including additional language applications, check the
Texas Instruments web site at:
into the selected language.
TI-89 / TI-92 Plus
Page 3
screen. See "Transmitting
VAR-LINK
education.ti.com
Chapter 1: Getting Started
,
TI-89 / TI-92 Plus
( ...) of the
Mode
5