Shark PowerDetect IP1000 Series Owner's Manual page 7

MAINTAINING YOUR VACUUM
EMPTYING THE HANDHELD VACUUM DUST CUP (IP1000 SERIES)
To empty the handheld vacuum dust cup,
turn off the power and hold the vacuum
directly over the rubbish bin. Press the
release button and the dust cup lid will drop
open, releasing debris.
CLEANING THE VACUUM DUST CUP
Fig. 1
1. To access the dust cup on your IP1000
hand vacuum, engage the dust cup
removal button and pull downward
disengage from the hand vacuum (Fig. 1).
NOTE: For best results, clean your filters at least once a month and replace the filters
regularly. To clean filters, clear loose debris and rinse with cold water ONLY to prevent
damage from cleaning chemicals. Allow all filters to dry fully before reinstalling to prevent
liquid from being drawn into electrical parts. Maintaining your Filters will ensure successful
cleaning and Auto-Empty evacuation (IP3000 series only).
1. To access filter, press the dust cup release
button and remove the dust cup.
12 13
s h a r kc l e a n . c o . u k
MAINTAINING YOUR VACUUM
CLEANING THE VACUUM ANTI-ALLERGEN FILTER
s h a r kc l e a n . c o . u k
2. Pull the release tab to remove the filter for
the vacuum.
3. After cleaning, slide the filter back into the
vacuum.