Table of Contents
Advertisement
5.
Insert the new drive unit in the slot until the tab locks in place.
6.
Reconnect the data and power cables.
7.
Replace the chassis cover (replace the server in the rack, if necessary) and
power up the system.
Figure 6-5. Installing a DVD-ROM Drive
6-5
Power Supply
The SuperServer 1025C-3 has a high-effi ciency 560 watt power supply, which is
auto-switching capable. This enables it to automatically sense and operate with a
100V to 240V input voltage.
Power Supply Failure
If the power supply unit fails, the system will shut down and you will need to re-
place the unit (p/n PWS-562-1H). Replacement units can be ordered directly from
Supermicro (see contact information in the Preface). As there is only one power sup-
ply unit in the SC111 chassis, power must be completely removed from the server
before removing and replacing the power supply unit for whatever reason.
Chapter 6: Advanced Chassis Setup
6-7
Advertisement
Table of Contents
