Subscribe to Our Youtube Channel
Related Manuals for BRIO FUS100A11
Summary of Contents for BRIO FUS100A11
- Page 1 Under Sink Water Filtration System Instruction Manual Model Nos.: FUS100A11, FUS100A16, FUS100A22, FUS100A26...
-
Page 2: Table Of Contents
Table of Contents Safety Information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 Intended Use . -
Page 3: Safety Information
Safety Information WARNING: To reduce risk of injury and property damage, you must read this entire guide before assembling, installing, and operating the filtration system. • The installation must comply with state and local laws and regulations. • Product must be installed indoors. Do NOT use outdoors. •... -
Page 4: Package Contents
Package Contents Part Description Part Description Filter head 3/8” female to 1/2” male converter B Filter cartridge Self-tapping screws (qty. 2) Braided inlet hose Seal tape Braided outlet hose Anchor sleeve (qty. 2) 3/8” male to 1/2” female converter A C-type buckle (qty. -
Page 5: Installation
Installation Fix the Filter Head and the Filter NOTE: Mount the water filter so that the bottom is at least 2 in. above the ground for easier filter change. Remove filter cartridge from filter bracket head by rotating a 1/4 turn clockwise, then pulling downward. Set filter cartridge aside in a safe place. -
Page 6: Flush The System And Check For Leaks
NOTE: Seal tape has been provided to facilitate installation. We recommend using it on all threaded connections. Connect the braided inlet hose (C) and the braided outlet hose (D) to the filter head (A) quick connect fitting. Secure each braided hose with a C-type buckle (J) by sliding it under collar of quick connect port. -
Page 7: Maintenance
The filter’s service life is related to source water quality. If the flow rate is significantly reduced or if the water has a peculiar smell, replace the filter cartridge. Filtration System Replacement Filter Model No . Replacement Schedule FUS100A11 RPFFUS10011 Every 10,000 gallons or 12 to 24 months FUS100A16 RPFFUS10016... -
Page 8: Troubleshooting
Troubleshooting Problem Probable Cause Solution Properly flush the system. See The water has a black or dark The system may not have been “Flush the System and Check for appearance. properly flushed. Leaks” on page 6. The water pressure is low. Add a booster pump. -
Page 9: Warranty
Warranty Brio (“Vendor”) warrants to the original purchaser of the Brio Water Filtration System (the “Product”), and to no other person, that if the Product is assembled and operated in accordance with the printed instructions accompanying it, then for a period of one (1) year from the date of purchase, all parts in the Product shall be free from defects in material and workmanship. - Page 12 WWW.BRIOWATER.COM ©2025 Brio Water Technology, Inc.
Need help?
Do you have a question about the FUS100A11 and is the answer not in the manual?
Questions and answers