Related Manuals for BRIO amphora
Summary of Contents for BRIO amphora
- Page 1 Ultra Filtration System with Stainless Steel Faucet Setup Manual Model No.: ROP100FWHT...
-
Page 3: Table Of Contents
Table of Contents Safety Information � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � 4 Intended Use �... -
Page 4: Safety Information
Safety Information WARNING: To reduce risk of injury and property damage, you must read this entire manual before assembling, installing, and operating the filtration system. WARNING: In order to ensure safety and to avoid injury and property loss to you and others, please be sure to follow the following safety precautions. -
Page 5: Package Contents
• Hotels and other hospitality venues • Catering events and similar non-retail applications Package Contents Part Description Part Description Filtration Engine All-in-one filter (preinstalled) Feed water adapter with extra nut White tubing Plumber’s tape Faucet with hardware Materials Needed Phillips-Head Adjustable Wrench Power Drill 1/2"... -
Page 6: Installation Overview
Installation Overview Installation 1� Connect to the Cold Water Supply CAUTION: DO NOT CONNECT THIS WATER LINE TO A HOT WATER SUPPLY LINE. The water supply to the unit MUST be from the COLD WATER LINE. Using HOT WATER will severely damage your filters. - Page 7 A� Turn off and then disconnect the current cold water supply line. B� Connect the feed water adapter (B) to the cold water supply line. C� Twist the cold water supply line clockwise on top of the feed water adapter (B) until it is securely connected.
-
Page 8: Install The Faucet
2� Install the Faucet IMPORTANT: If your sink does not have a second faucet hole, please contact a licensed professional to create one. Do NOT attempt to drill a faucet hole yourself as this may damage the sink. A� Install the faucet body (E) with base plate (1) and washer (2) over the hole in the sink. -
Page 9: Maintenance
3� Close the faucet handle and allow the system to fill again. 4� Repeat steps 3-4 two more times (about 4-6 hours). (Occasionally check for leaks during this time.) 5� Check for leaks daily during the first week of use and periodically thereafter. NOTE: You may notice that the water has a milky color during the first week. -
Page 10: Care And Cleaning
• Periodically check all connections for leaks. • Replace any connectors and filter housings with proper replacement parts. Contact customer service to order replacement parts. • Always use the proper replacement filter with the correct size and length. • Replace the plumber’s tape on all threaded connections and fittings annually. Care and Cleaning •... -
Page 11: Warranty
Warranty Brio (“Vendor”) warrants to the original purchaser of the Brio Water Filtration System (the “Product”), and to no other person, that if the Product is assembled and operated in accordance with the printed instructions accompanying it, then for a period of one (1) year from the date of purchase, all parts in the Product shall be free from defects in material and workmanship. - Page 12 Contact Us Call: +1 844-257-4103 ©2021 DTWUSA...
Need help?
Do you have a question about the amphora and is the answer not in the manual?
Questions and answers