Related Manuals for Total TIDLI1232 Series
Summary of Contents for Total TIDLI1232 Series
- Page 1 PRODUCT MANUAL LITHIUM-ION IMPACT DRILL TIDLI1232, TIDLI1232xy,UTIDLI1232, UTIDLI1232xy, TIDLI12201, TIDLI12201xy UTIDLI12201, UTIDLI12201xy x(blank,1,2,3,4,5,6,7,8,9,E,S,A,M) y(blank,-1,-2,-3,-4,-5,-6,-7,-8,-9,E,S,A,M)
-
Page 2: General Safety Warnings
| English Original Instructions GENERAL SAFETY WARNINGS ⚠ Warning! Work area safety Keep work area clean and well lit. Cluttered and dark areas invite accidents. Do not operate power tools in explosive atmospheres, such as in the presence of flammable liquids, gases, or dust. Power tools create sparks which may ignite the dust or fumes. - Page 3 | English Use personal protective equipment. Always wear eye protection. Protective equipment such as dust mask, non-skid safety shoes, hard hat, or hearing protection used for appropriate conditions will reduce personal injuries. Prevent unintentional starting. Ensure the switch is in the off position before connecting to power source and/or battery pack, picking up or carrying the tool.
- Page 4 | English operation. If damaged, have the power tool repaired before use. Many accidents are caused by poorly maintained power tools. Keep cutting tools sharp and clean. Properly maintained cutting tools with sharp cutting edges are less likely to bind and are easier to control. Use the power tool, accessories, and tool bits etc.
- Page 5 | English BATTERY TOOL SAFETY WARNINGS Save these instructions. Caution: only use genuine original batteries. Use of non-genuine batteries, or batteries that have been altered, may result in the battery bursting causing fires, personal injury, and damage. It will also void the warranty for the tool and chargerered and dark areas invite accidents.
- Page 6 | English Never recharge a fully charged battery cartridge. Overcharging shortens the battery service life. Charge the battery cartridge with room temperature at 10°C-40°C (50°F- 104°F). Let a hot battery cartridge cool down before charging it. Charge the battery cartridge if you do not use it for a long period (more than six months).
- Page 7 | English THE SYMBOLS IN INSTRUCTION MANUAL Double insulated for additional protection Read the instruction manual before using. CE conformity. Safety alert. Please only use the accessories supported by the manufacturer. Wear safety glasses, hearing protection and dust mask. Waste electrical products should not be disposed of with household waste. Please recycle where facilities exist.
-
Page 8: Additional Safety Warning
| English ADDITIONAL SAFETY WARNING Drill safety warnings Hold power tool by insulated gripping surfaces, when performing an operation where the cutting accessory may contact hidden wiring. Cutting accessory contacting a "live" wire may make exposed metal parts of the power tool "live" and could give the operator an electric shock. -
Page 9: Technical Specifications
| English SPECIFICATIONS 1. Reversing switch lever 5. lamp 2. Motor 6. chuck 3. Speed change lever 7. Adjusting torque ring 4. switch Technical specifications TIDLI12201,TIDLI12201xy, UTIDLI12201, UTIDLI12201xy, TIDLI1232,TIDLI1232xy， UTIDLI1232, UTIDLI1232xy Model No. x(blank, 1,2,3,4,5,6,7,8,9,E,S,A,M) x(blank, 1,2,3,4,5,6,7,8,9,E,S,A,M) y(blank, -1,-2,-3,-4,-5,-6,-7,-8,- y(blank, -1,-2,-3,-4,-5,-6,-7,-8,- 9,E,S,A,M) 9,E,S,A,M) Drill... - Page 10 | English Torque 18+1+1 18+1+1 settings torque 20Nm 20Nm force Keyless chuck 0.8-10mm 1/32˝-3/8˝ capacity • Due to our continuing program of research and development, the specifications herein are subject to change without notice. • Specifications and battery cartridge may differ from country to country. •...
- Page 11 | English ⚠ Warning! Only use original battery pack and battery charger as below for this power tool: x (blank, 1, 2, 3, 4, 5, 6, 7, 8, 9, E, S, A, M) y (blank, -1, -2, -3, -4, -5, -6, -7, -8, -9, E, S, A, M) Product Battery pack Model No.
- Page 12 | English OPERATION PICTURE...
-
Page 13: Function Description
| English FUNCTION DESCRIPTION ⚠ Caution Always be sure that the tool is switched off and the battery cartridge is removed before adjusting or checking function on the tool Installing or removing battery cartridge: (see Dia A) Dia A: 1. Battery cartridge 2. - Page 14 | English Reversing switch action (see Dia D) Dia D: 1. Reversing switch lever This tool has a reversing switch to change the direction of rotation. Depress the reversing switch lever from the A side for clockwise rotation or from the B side for counterclockwise rotation.
-
Page 15: Operation
| English Assembly ⚠ Caution Always be sure that the tool is switched off and the battery cartridge is removed before carrying out any work on the tool. Installing or removing driver bit or drill bit (see Dia G) Dia G: 1. Sleeve Turn the sleeve counterclockwise to open the chuck jaws. - Page 16 | English Nominal diameter of wood screw (mm) Recommended size of pilot hole (mm) 2.0-2.2 2.2-2.5 2.5-2.8 2.9-3.2 3.1-3.4 3.3-3.6 3.7-3.9 4.0-4.2 4.2-4.4 Drilling operation First, turn the adjusting ring so that the pointer points to the marking. Then proceed as follows. Drilling in wood When drilling in wood, the best results are obtained with wood drills equipped with a guide screw.
- Page 17 | English reverse rotation in order to back out. However, the tool may back out abruptly if you do not hold it firmly. ⚠ Caution Always secure small workpieces in a vise or similar hold-down device. ⚠ Caution If the tool is operated continuously until the battery cartridge has discharged, allow the tool to rest for 15 minutes before proceeding with a fresh battery.
- Page 18 | English MAINTENANCE&MALFUNCTIONS Possible malfunctions and methods of their eliminations Malfunction Probable causes Actions ● Switch failure ●The power cord or wiring is broken, Disconnect When the machine is turned power cord plug malfunction; machine from the on, the electric motor does ●...
- Page 19 TOTAL TOOLS WORLD MADE IN CHINA T0523.V01 TOTAL TOOLS CO., PTE. LTD. No. 45 Songbei Road, Suzhou Industrial Park, China.
Need help?
Do you have a question about the TIDLI1232 Series and is the answer not in the manual?
Questions and answers