Related Manuals for Total TG111136 Series
Summary of Contents for Total TG111136 Series
- Page 1 PRODUCT MANUAL IMPACT DRILL TG111136,TG111136xy,TG111136UP UTG111136,UTG111136xy x (blank, 1, 2, 3, 4, 5, 6, 7, 8, 9, E, S, A, M) y (blank, -1, -2, -3, -4, -5, -6, -7, -8, -9, E, S, A, M)
-
Page 2: General Safety Warnings
| English Original Instructions GENERAL SAFETY WARNINGS ⚠ Warning! Work area safety Keep work area clean and well lit. Cluttered and dark areas invite accidents. Do not operate power tools in explosive atmospheres, such as in the presence of flammable liquids, gases, or dust. Power tools create sparks which may ignite the dust or fumes. - Page 3 | English operating power tools may result in serious personal injury. Use personal protective equipment. Always wear eye protection. Protective equipment such as dust mask, non-skid safety shoes, hard hat, or hearing protection used for appropriate conditions will reduce personal injuries. Prevent unintentional starting.
- Page 4 | English breakage of parts and any other condition that may affect the power tools operation. If damaged, have the power tool repaired before use. Many accidents are caused by poorly maintained power tools. Keep cutting tools sharp and clean. Properly maintained cutting tools with sharp cutting edges are less likely to bind and are easier to control.
- Page 5 | English THE SYMBOLS IN INSTRUCTION MANUAL Double insulated for additional protection Read the instruction manual before using. CE conformity. Safety alert. Please only use the accessories supported by the manufacturer. Wear safety glasses, hearing protection and dust mask. Waste electrical products should not be disposed of with household waste. Please recycle where facilities exist.
-
Page 6: Additional Safety Warning
| English ADDITIONAL SAFETY WARNING Drill safety warnings Wear ear protectors when impact drilling. Exposure to noise can cause hearing loss. Use auxiliary handle(s), if supplied with the tool. Loss of control can cause personal injury. Hold power tool by insulated gripping surfaces, when performing an op- eration where the cutting accessory may contact hidden wiring or its own cord. -
Page 7: Technical Specifications
| English SPECIFICATIONS Chuck Switch lock button Depth gauge Variable speed control Locking screw for depth gauge Cable sleeve Auxiliary handle On/Off switch Drill/Impact action selector switch 10. Forward/reverse selector switch Accessories 1. 1Pcs auxiliary handle 2. 1Pcs depth gauge 3. - Page 8 | English OPERATION PICTURE...
-
Page 9: Operation
| English OPERATION ⚠ Warning! Before using your drill be sure to read the instruction manual carefully. Installing the auxiliary handle (see Figure A) For your personal safety we recommend using the auxiliary handle at all times. To fit the handle, loosen the locking screw for handle collar anti-clockwise. Slide clamping loop over the handle collar. - Page 10 | English the forward/ reverse selector switch to "L" position indicated on your drill. The rotation will be reverse rotation. Note: Never move the forward/reverse switch whilst the drill in operation or the on/off switch is locked as this will Drill/Impact action switch (see Figure G) When drilling masonry and concrete push the drill/impact action selector switch into the hammer position "...
- Page 11 | English MAINTENANCE & MALFUNCTIONS Possible malfunctions and methods of their eliminations Malfunction Probable causes Actions ● Switch failure ●The power cord or wiring is broken, Disconnect When the machine is turned power cord plug malfunction; machine from the on, the electric motor does ●...
- Page 12 TOTAL TOOLS WORLD MADE IN CHINA T0623.V09 TOTAL TOOLS CO., PTE. LTD. No. 45 Songbei Road, Suzhou Industrial Park, China.
Need help?
Do you have a question about the TG111136 Series and is the answer not in the manual?
Questions and answers