Advertisement
HSA Riser
INTRODUCTION
Thank you for purchasing this Profile Design product. These instructions apply to the HSA Riser.
Please read these instructions thoroughly before attempting to install this item. Proper installation is required for compliance with Profile Design's
warranty policy. If you are not familiar with installation of Aerobars or their accessories, please seek the assistance of your local Profile design dealer
by logging on to www.profile-design.com and using "dealer search" or by calling Profile Design's customer service number p.# 888.800.5999.
Note to Dealers: If you install this product for the consumer, please provide him/her with this owner's manual after installation.
Tools and materials required:
• 8 mm Hex Wrench
• Torque Wrench with a 8mm Hex fitting
Your kit should contain:
• HSA Riser 45mm
(1) Plastic Riser
(2) M5x55mm bolts
(2) Washers
• HSA Riser 90mm
(2) Plastic Risers
(2) M5x55mm bolts
(2) M5x100mm bolts
(2) Washers
1
Advertisement
Need help?
Do you have a question about the HSA RISER and is the answer not in the manual?
Questions and answers