Dickson RFL Quick Start Manual

RFL
™
LoRa-Equipped Data Logger for DicksonOne
This Quick-start Guide presents an overview of the Dickson RFL data logger, with setup and
connection instructions to get your device up and running with your LoRa gateway. You can
then register the data logger
more.
To register RFL data loggers in your DicksonOne account, please make sure that your RF
gateway is connected to the internet and registered to your DicksonOne account to simplify
the process.
RF loggers require an installed RFG Gateway in order to communicate. If you do
not have a gateway already installed, please configure and install your gateway
first. If you did not purchase the RFG Gateway, please contact Dickson sales to
purchase.
What's in the box
RFL data logger & Wall mounting plate
replaceable sensor
Your sensor may differ
from this image
Note: RFL data loggers are designed to run on batteries, but you can also power the
devices with both an AC adapter (part: A075) and AA batteries. The benefit of
combining the two power sources is that the AA batteries have a longer battery life
when an AC adapter is also plugged in.
In any case, AA batteries must always be installed and have power remaining in
them in order for the data logger to continue to collect and store data.
RFL Data Logger Quick Start Guide (DicksonOne)
in DicksonOne to view data online, configure alarms, and much
& hardware
The plate is delivered
attached to the data
logger
2 x AA USB OTG
batteries cable
Page 1