Page 1
Range Name:NOVA Box1 dimensions:L134xW73xH13(cm) Nova Desk P-1/15...
Page 2
Before you begin , it's best to identify all of the parts and fittings to build your table frame. We advise laying these out on the clean and flat floor to check you have everything , and to familiarise yourself with all of the parts and fittings before building. We recommend that you assemble the table in the room you'd like it to be located.
Page 3
Parts List Before you begin building your Nova Desk , please take a moment to read through the instructions and make sure that you have all the relevant parts listed on the parts check list. Part Number Part Number Quantity...
Page 4
Fittings Please check you have all the fittings listed below with your product M6x64 M6x44 Φ15x11mm Φ6x25mm Φ8x30mm M3.5x14mm Screw CAM Lock Screw CAM Lock Screw CAM Lock Wooden Dowel Wooden Dowel 12pcs+1pc extra 34pcs+2pcs extra 8pcs+1pc extra 4pcs +1pc extra 10pcs+1pc extra 30pcs+2pcs extra 15x9mm...
Page 5
Slides Must Be Separated Before Assembly. After Separated, Set Aside Until Needed for Assembly. Pay attention when connecting ! The sliding module must be at the front end. STEP 1 : Extend Slide Mount Lever STEP 2: Push Lever UP Push lever for the left of drawer , press the lever for the right of drawer .
Page 6
1. Attach parts to the Top Panel. M6x44 Φ15x11mm 76x32mm M6x64 M4x12mm Screw CAM Lock Screw CAM Lock Screw CAM Lock L-shaped Bracket 6pcs 6pcs 2pcs 2pcs 2pcs 2. Attach parts to the Bottom Panel. 180° M6x84 Φ15x11mm M3.5x14mm Screw 83x14x19mm Pusher CAM Lock Screw CAM Lock...
Page 7
3. Attach the Side Panel to the Top Panel . 100% Φ15x11mm Φ6x25mm CAM Lock Wooden Dowel 6pcs 4pcs 4. Attach the Middle Panel to the Frame. 100% 100% Φ15x11mm Φ8x30mm CAM Lock Wooden Dowel P-7/15 2pcs 2pcs...
Page 8
5.Attach parts to the Left Side Panel ,Right Side Panel and Middle Panel. M3.5x14mm Screw Slide-R1 8pcs 4pcs 6. Attach the Back Panels into the Frame. P-8/15...
Page 9
7. Attach the Bottom Panel to the Frame. 100% Φ15x11mm Φ6x25mm Φ8x30mm CAM Lock Wooden Dowel Wooden Dowel 6pcs 4pcs 2pcs 8. Lock the CAM Locks tightly. 100% 4mm Allen Key M7x50mm Screw P-9/15 2pcs...
Page 10
9. Attach the Legs to the Leg Supports. M6x40mm Bolt 4mm Allen Key M6 Adjustable Foot 4pcs 4pcs 10. Attach the Legs to the Frame. 100% M6x30mm Bolt 4mm Allen Key P-10/15 12pcs...
Page 11
11. Attach the Metal support to the frame and Lock the Bolts tightly. 100% 100% M6x12mm Bolt 4mm Allen Key 4pcs 12. Attach the Plastic Buckles. 15x9mm M3.5x14mm Screw Plastic Buckle P-11/15 8pcs 8pcs...
Page 12
13.Attach parts to the drawer. M6x44 Ø16mm Screw and Washer CAM Lock Screw 2pcs 8pcs 14. Assemble the drawer. M3.5x35mm Screw P-12/15 8pcs...
Page 13
15. Slide in the Drawer Base, and attach the Drawer Front by locking the CAM Locks tightly. 100% Φ15x11mm Φ20mm Cover CAM Lock 8pcs 8pcs 16. Attach parts to the drawer. M3.5x14mm Screw Slide-R2 P-13/15 8pcs 4pcs...
Page 14
17. Assemble the drawers in the desk . 18. Adjust the pushers to appropriate position. P-14/15...
Page 15
19. Fix the L-Shaped Bracket to the wall. Φ8mm M4x40mm Screw Expansion Tube P-15/15 2pcs 2pcs...
Need help?
Do you have a question about the Nova and is the answer not in the manual?
Questions and answers