Sleepnet MiniMe 2 Quick Start Manual

PEDIATRIC
MiniMe 2 Nasal Mask
®
Quick Start Guide
1
2
3
4
5
www.sleepnetmasks.com | 5 Merrill Industrial Drive, Hampton, NH | 1-800-742-3646 | M90175 Version 0
Made in the USA of US and globally sourced components | Our products are backed by Sleepnet's warranty against manufacturing defects
Place the headgear over the patient's head. Position the mask over
the nose, ensuring the bottom cushion sits between the upper lip
and nose.
Thread the bottom two straps through the slots.
The Touchless Spacebar should not contact the forehead.
Ensure the top headgear strap is fully extended and lies flat
across the back of the patient's head, with the headgear
logo facing outward.
Position the upper and lower straps evenly on both sides of the
patient's head. Gradually tighten the headgear straps, starting
from the bottom and working your way up. Make sure the upper
and lower straps are parallel as shown. The mask should fit
comfortably snug, but not too tight. Check for any pressure
points or discomfort, and adjust as needed.
The MiniMe 2 contains Custom Fit Technology. This soft mask shell
®
can be shaped to follow the contours of a child's face.
Gently press the edges of the mask to change the mask shape,
create a comfortable fit, and reduce leaks.