Sending Methods; Dialing Methods; Sending Documents; Direct Sending - Canon FAXPHONE 40 User Manual

Sending methods _____________________________

Direct sending (see below)
Memory sending (see p. 5-3)
Manual sending (see p. 5-4)

Dialing methods ______________________________

There are several methods of dialing the receiving party's number, depending on how your fax is
set up.
Regular dialing
One-touch speed dialing (see p. 5-5)
Coded speed dialing (see p. 5-5)
Directory dialing (see p. 5-6)

Sending documents

Direct sending ________________________________

1 Load the document face up into the document tray.
See Loading documents, p. 3-2.
You can set the scanning resolution and contrast (see p. 5-1).
2 Dial the receiving party's fax number.
Use one of the dialing methods described in this chapter.
TEL=
3 Press [Start/Copy] twice.
The fax begins sending.
n • If an error occurs during sending, the fax beeps intermittently for a few seconds and an error
message appears on the LCD. If this happens, correct the error and then press [Stop], then try
sending the document again. See LCD messages, p. 8-15.
• The fax automatically redials if the receiving party does not answer or if the line is busy. (You
can specify the number of times it redials; see AUTO REDIAL, p. 7-3.)
5-2
3456xxxx