Advertisement
Quick Links
Wedgetail Accessory Fiamma Awning Bracket
Fitting Instruction
Congratulations on the purchase of your Australian made Wedgetail Roof Rack product.
Please read and follow the instructions carefully to ensure correct fitment.
Contact us if any parts appear missing, incorrect, or damaged.
Contact us if any question about the size of platform to ensure the correct fitment
1
2
WTA-FABB_Fitting_Rev1 Updated
Updated: 20 SEP 2024
Tools Required:
•
Hex key (5mm)
Kit Content
WTA-FAAB Fiamma Bracket P1
x1
WTA-FAAB Fiamma Bracket P2
x1
•
Spanner (10mm)
M8X20 Sems Black
3
M8 Channel Nut
4
COPYRIGHT TRADESMAN ROOF RACKS |WEDGETAILRACK.COM.AU
WTA-FAAB
x3
x3
Advertisement
Related Manuals for WEDGETAIL WTA-FAAB
Summary of Contents for WEDGETAIL WTA-FAAB
- Page 1 Wedgetail Accessory Fiamma Awning Bracket Fitting Instruction WTA-FAAB Congratulations on the purchase of your Australian made Wedgetail Roof Rack product. Please read and follow the instructions carefully to ensure correct fitment. Contact us if any parts appear missing, incorrect, or damaged.
- Page 2 Wedgetail Accessory Fiamma Awning Bracket Fitting Instruction WTA-FAAB • Shorten the cup bolts that come with the Fiamma awning to 17mm long this allows the awning to sit 15mm off the side of the rack) • Loosely bolt Fiamma brackets to the...
- Page 3 Wedgetail Accessory Fiamma Awning Bracket Fitting Instruction WTA-FAAB • Re install black M8 bolt through the lower bracket and into the channel nut left in place in step 3 • Now you can tighten the M6 nuts holding all 3 parts of the bracket together. You will need to use an open-ended spanner and come in from the side.
Need help?
Do you have a question about the WTA-FAAB and is the answer not in the manual?
Questions and answers