Advertisement
Quick Links
Accessory – Recovery Side Wing Tracks
Bracket
Congratulations on the purchase of your
Australian made Wedgetail Roof Rack
accessory.
ITEM
PART NAME
NO.
1.
Trax Plate
2.
Angle Bracket
3.
M8 X 20 Bolt and washer
4.
M8 Flat Washer
5.
M8 Nyloc Nut
6.
M8 Channel Nut
Please follow these instructions to ensure
correct fitment.
1. Assemble the Trax plate in the top of the angle
bracket using the M8 Bolt, washer and nuts.
Refer to the diagram.
2. Assemble the bracket on the crossbar using
M8 Bolt, washer, and channel nuts.
QTY
2
2
8
4
4
3. Keep a gap of 3 crossbars and then put the 2
4
Trax plate on the 4
Refer to the diagram below to identify the
slot to be used for your rack.
COPYRIGHT TRADESMAN ROOF RACKS
WTA-TBSW
th
crossbar.
| WEDGETAILRACK.COM.AU
nd
Advertisement
Subscribe to Our Youtube Channel
Related Manuals for WEDGETAIL WTA-TBSW
Summary of Contents for WEDGETAIL WTA-TBSW
- Page 1 WTA-TBSW Accessory – Recovery Side Wing Tracks Bracket Congratulations on the purchase of your Australian made Wedgetail Roof Rack accessory. 2. Assemble the bracket on the crossbar using M8 Bolt, washer, and channel nuts. ITEM PART NAME Trax Plate Angle Bracket...
- Page 2 Maxtrax Locking Pins needs to be purchased separately. Thank you for your purchase Wedgetail by Tradesman Roof Racks Innovation through Inspiration COPYRIGHT TRADESMAN ROOF RACKS | WEDGETAILRACK.COM.AU...
Need help?
Do you have a question about the WTA-TBSW and is the answer not in the manual?
Questions and answers