Angelo Po 0S1F88E User Manual page 137

ADJUSTMENTS
WARNING: Before it is put into ser-
vice, the system must be tested to check the
operating conditions of every single compo-
nent and identify any malfunctions. In this
stage, it is important to check that all health
and safety requirements have been com-
plied with in full.
To test the system, make the following checks:
Check that the mains voltage is the same as
1)
that of the appliance.
INSTRUCTIONS AND WARNINGS FOR ADJUSTMENTS
The appliance's main functions do not require
any special adjustments by specialist staff ex-
cept the settings made during use by the user.
INSTRUCTIONS AND WARNINGS FOR THE REPLACEMENT OF PARTS
The appliance does not require the replace-
ment of operating components by specialist
staff except the replacement of standard parts
which can be carried out by the user.
APPLIANCE DECOMMISSIONING, SCRAPPING AND DISPOSAL
NOTE
: Read the following section of
the user instruction manual carefully before
replacing any part:
– Hazards and safety provisions during decom-
missioning.
When decommissioning the appliance, a series
of procedures must be carried out to ensure
that the appliance and its components are not
a hindrance and are not easily accessible.
To ensure that the appliance cannot constitu-
te hazards for people or the environment, all
energy sources (electricity, etc.) must be di-
sconnected and rendered unusable, and any
liquids present must be drained (lubricants,
fl uids, etc.).
3443390_inst_GB
TESTING OF THE APPLIANCE
ADJUSTMENTS
REPLACING PARTS
Operate the appliance's circuit-breaker to
2)
check the electrical connection.
Check that the safety device is operating cor-
3)
rectly.
After testing, if necessary instruct the user in all
the skills necessary for putting the appliance
into operation in conditions of safety, in accor-
dance with legal requirements.
Place the appliance in a suitable area which is
not easily accessible, with barriers to prevent
anyone from accessing it.
When scrapping, sort all components by che-
mical characteristics and dispose of them se-
parately in accordance with the relevant legal
requirements.
IMPORTANT:
biodegradable materials, lubricating oils
and non-ferrous metal components (rubber,
PVC, etc.) in the environment. Dispose of
them in accordance with the applicable laws.
ENGLISH
Never dump non-
11