Using The Equalizer; Using Balance Adjustment - Pioneer AVIC Z1 - CD-SR1 Steering Wheel Remote Operation Manual

Chapter
32 Customizing preferences
p You cannot make adjustments in the follow-
ing situations:
— AV source is [Off]
— During muting/attenuation
p You cannot select [SLA] when the FM tuner
is selected as the AV source.

Using balance adjustment

You can select a fader/balance setting that
provides an ideal listening environment in all
occupied seats.
Touch [FAD/BAL] on the "AV Sound Set-
1
tings" menu.
= For details, refer to Displaying the "AV
Sound Settings" menu on the previous
page.
When [Sub. W] is selected in [Rear SP],
[Balance] will be displayed instead of
[FAD/BAL] and front/rear speaker balance
cannot be adjusted.
= Refer to Setting the rear output on page 161.
2 Touch [a] or [b] to adjust front/rear
speaker balance.
Each time you touch [a] or [b], the front/rear
speaker balance moves towards the front or
the rear.
"Front:15" to "Rear:15" is displayed as the
front/rear speaker balance moves from front to
rear.
Setting "Front:" and "Rear:" to "0" is correct
when using a two speaker system.
3 Touch [c] or [d] to adjust left/right
speaker balance.
Each time you touch [c] or [d], the left/right
speaker balance moves towards the left or the
right.
164
En
Left:15 to Right:15 is displayed as the left/
right speaker balance moves from left to right.

Using the equalizer

The equalizer lets you adjust equalization to
match vehicle interior acoustic characteristics
as desired.
Recalling equalizer curves
There are seven stored equalizer curves that
you can easily recall at any time. Here is a list
of the equalizer curves:
Equalizer curve
Super Bass
Super Bass is a curve in which only low-pitched
sound is boosted.
Powerful
Powerful is a curve in which low-pitched and high-
pitched sounds are boosted.
Natural
Natural is a curve in which low-pitched and high-
pitched sounds are slightly boosted.
Vocal
Vocal is a curve in which the midrange, which is the
human vocal range, is boosted.
Flat
Flat is a flat curve in which nothing is boosted.
Custom1
Custom1 is an adjusted equalizer curve that you cre-
ate. A separate custom curve can be created for each
source.
Custom2
Custom2 is an adjusted equalizer curve that you cre-
ate. If you select this curve, the effect is reflected all
AV source.