Ejecting An Sd Memory Card; Plugging And Unplugging A Usb Storage Device - Pioneer AVIC Z1 - CD-SR1 Steering Wheel Remote Operation Manual

Chapter
02 Basic operation
2 Touch [SD Insert].
The LCD panel opens, and the SD card slot ap-
pears.
3 Insert an SD memory card into the SD
card slot.
Insert it with the contact surface facing to the
left and press the card until it clicks and com-
pletely locks.
4 Press the OPEN CLOSE button.
The LCD panel closes, and then the navigation
system restarts.
p If the SD memory card only contains music
files or video files, the navigation system
will not be restarted.

Ejecting an SD memory card

1 Press the OPEN CLOSE button.
The "Monitor Setup" screen appears.
30
En
2 Touch [Eject SD].
The following message appears.
3 Touch [Yes].
The navigation system restarts, and then the
LCD panel opens.
4 Press the SD memory card until it clicks.
5 Pull out the SD memory card.
6 Press the OPEN CLOSE button.
The LCD panel closes, and then the navigation
system restarts.
Plugging and unplugging a
USB storage device
CAUTION
! To prevent data loss and damage to the sto-
rage device, never remove it from this naviga-
tion system while data is being transferred.
! If data loss or corruption occurs on the sto-
rage device for any reason, it is usually not
possible to recover the data. Pioneer accepts
no liability for damages, costs or expenses
arising from data loss or corruption.