Checking The Current Itinerary; Adding A Waypoint - Pioneer AVIC Z1 - CD-SR1 Steering Wheel Remote Operation Manual

Chapter
06 Setting a route to your destination
Avoid Toll Road
This setting controls whether toll roads (in-
cluding toll areas) should be taken into ac-
count.
[Off]*:
Calculate a route that may include toll roads
(including toll areas).
[On]:
Calculate a route that avoids toll roads (includ-
ing toll areas).
p The system may calculate a route that in-
cludes toll road even if [On] is selected.
Avoid Ferry
This setting controls whether ferry crossings
should be taken into account.
[Off]*:
Calculate a route that may include ferries.
[On]:
Calculate a route that avoids ferries.
p The system may calculate a route that in-
cludes ferry way even if [On] is selected.
Avoid Freeway
This setting controls whether freeways may be
included in the route calculation.
[Off]*:
Calculate a route that may include freeways.
[On]:
Calculate a route that avoids freeways.
p The system may calculate a route that in-
cludes freeway even if [On] is selected.
Time restrictions
This setting controls whether streets or
bridges have traffic restrictions during a cer-
tain time should be taken into account.
p If you want to set your route to avoid
opened bridges, select [On].
[On]*:
Calculate a route while avoiding streets or
bridges with traffic restrictions during a cer-
tain time.
[Off]:
Calculate a route while ignoring traffic restric-
tions.
50
En
p The system may calculate a route that in-
cludes streets or bridges that are subject to
traffic restrictions during a certain time
even if [On] is selected.
CAUTION
If the time difference is not set correctly, the navi-
gation system cannot consider traffic regulations
correctly. Set the time difference correctly (=
Refer to Setting the time difference on page 97).
Learning Route
The system learns the travel history of your ve-
hicle for each road.
This setting controls whether or not the travel
history should be taken into account.
[On]*:
Calculate the route with the travel history
taken into account.
[Off]:
Calculate the route without the travel history
taken into account.
[Clear]:
Clear the current travel history.

Checking the current itinerary

You can check the route details.
% Touch [Profile] on the "Route confirma-
tion screen".
The "Route Profile" screen appears.

Adding a waypoint

Up to 5 waypoints can be set, and waypoints
and final destination can be sorted automati-
cally or manually.