Sound Controls; Equalizer; P.bass Control; Bass/Treble Control - Pioneer X-CM32BT-K Operating Instructions Manual

04 Getting started

Sound controls

Equalizer

When the EQUALIZER is pressed, the current mode setting
will be displayed. To change to a different mode, press the
EQUALIZER repeatedly until the desired sound mode
appears.
FLAT
ACTIVE
DIALOGUE
NIGHT

P.bass control

When the power is first turned on, the unit will enter the
P.bass mode which emphasises the bass frequencies. To
cancel the P.bass mode, press the P.BASS on the remote
control.

Bass/treble control

Press the BASS/TREBLE, then press / to adjust the bass
or treble.
Note
• The EQUALIZER and P.BASS cannot operate
simultaneously. The most recently selected of these two
functions will be the one used.
• BASS/TREBLE can operate alongside either the
EQUALIZER or P.BASS.
When one of the above two functions is
selected, the function that is not selected will
be displayed as follows.
1 When P.BASS setting (ON/OFF) is changed
• EQUALIZER : FLAT
2 When EQUALIZER setting is changed
• P.BASS : OFF
16
En
A flat and basic sound
A powerful sound that
emphasizes low and high tones
A sound that allows the radio or
vocals to be heard more easily
A sound that can be enjoyed
at night even with lower volume

Setting the wake-up timer

Used to change the existing timer setting, or to set a new
timer.
Press  STANDBY/ON to turn the power on.
1
2 Press and hold CLOCK/TIMER.
Press / to select "ONCE" or "DAILY",
3
then press ENTER.
ONCE – Once timer play works for one time only at a
preset time.
DAILY – Daily timer play works at the same preset time
and days of week.
Press / to select "TIMER SET", then
4
press ENTER.
Press / to select the timer playback
5
source, then press ENTER.
CD, FM, AM, USB/IPOD, BT AUDIO, AUDIO IN and LINE can
be selected as the playback source.
Press / to select the timer day, then
6
press ENTER.
Press / to set the hour, then press
7
ENTER.
Press / to set the minute, then press
8
ENTER.
Set the time to finish as in steps 7 and 8 above.
9 Adjust the volume press VOLUME +/– , then
press ENTER.
10 Press  STANDBY/ON to enter the power
standby mode.
The TIMER indicator lights up.