Table of Contents
Advertisement
Chapter
32
Customizing preferences
Options on the "AV System
Settings" menu
Displaying the "AV System
Settings" menu
1
Press the HOME button to display the
"Top Menu".
2
Touch [Settings].
The "Settings Menu" screen appears.
3
Touch [AV Settings].
The "AV System Settings" menu appears.
p You can only adjust [Wide Mode] when se-
lecting an AV source with video.
p You can only adjust [Rear SP] when the AV
source is "Off".
Setting video input 1 (AV1)
You can switch this setting according to the
connected component.
p This setting applies to mini-jack input.
% Touch [AV1 Input] on the "AV System
Settings" menu.
= For details, refer to Displaying the "AV Sys-
tem Settings" menu on this page.
Each touch of [AV1 Input] changes the set-
ting as follows:
! iPod — iPod connected with the USB Inter-
face cable for iPod (CD-IU50V)
! Video — External video component
! Off — No video component is connected
p Use AV1 Input when connecting CD-RM10
(sold separately) through the external video
component.
160
En
Setting video input 2 (AV2)
You can switch this setting according to the
connected component.
p This setting applies to RCA inputs
(AUDIO INPUT and VIDEO INPUT) on the
back of the system.
% Touch [AV2 Input] on the "AV System
Settings" menu.
= For details, refer to Displaying the "AV Sys-
tem Settings" menu on this page.
Each touch of [AV2 Input] changes the set-
ting as follows:
! Off — No video component is connected
! EXT — Pioneer external unit connected
with the RCA video cable
! Video — External video component
Switching the auto antenna
setting
If the blue lead of the navigation system is
connected to the antenna control terminal of
the vehicle, select either of the following set-
tings.
! Power — The antenna extends or turns on
when the ignition switch is turned on. The
antenna is stored or turned off when the
ignition switch is turned off.
! Radio — The antenna extends or turns on
only when the audio source is FM or AM.
The antenna is stored or turned off when
the AV source is switched to another
source.
% Touch [ANT CTRL] on the "AV System
Settings" menu.
= For details, refer to Displaying the "AV Sys-
tem Settings" menu on this page.
Touching [ANT CTRL] switches between
[Radio] and [Power].
p Regardless of whether [Radio] or [Power]
is selected, turning off the ignition switch
will cause the antenna to automatically re-
tract or turn off.
Advertisement
Table of Contents
