Psoc 6 with airoc bluetooth le prototyping board (37 pages)
Summary of Contents for Infineon PSOC C3M5
Page 1
PSOC Control C3M5 Complete System Dual Buck Evaluation Kit KIT_PSC3M5_DP1 Kit contents 1. PSOC C3M5 control card 4. USB-C to USB-A cable 2. Dual buck evaluation board 5. Quick start guide (this document) 3. 24 V DC power adaptor www.infineon.com/KIT_PSC3M5_DP1...
Page 2
Before you start 1. Ensure that you have the following: – PC with USB-A port – UART terminal so ware such as Tera Term or PuTTY 2. Insert the PSOC C3M5 control card to 120-pin connecor (J11) on the Dual buck evaluation board. 3.
Page 3
PSOC C3M5 Control Card details 13 SWD & JTAG header (J8) USB connector (J1) 14 Non-isolated I2C header (J4) 5 V DC-DC isolator (U3) 15 SWD digital Isolator (U4) Onboard or External debugger switch (SW2) 16 XRES Digital isolator (U10) 17 I2C digital isolator (U7) 16MHz Crystal (Y3) 18 Isolated I2C header (J3)
Need help?
Do you have a question about the PSOC C3M5 and is the answer not in the manual?
Questions and answers