Connecting Wires To Terminals - Kenwood KIV-BT900 Quick Start Manual

Connecting Wires to Terminals

Parking sensor wire Junction cable
(Light Green) (Accessory 3)
For the sake of safety, be sure to connect the parking sensor.
⁄
USB device (commercially available)
iPod
(commercially
available)
iPod cable
(Accessory 4)
⁄
Do not remove the cap
when you do not use the
USB cable. The connector
will cause the unit to
malfunction if it gets in
touch with any metallic part
of the vehicle.
⁄
• Speaker Impedance
: 4 – 8 Ω
• USB terminal Maximum
Supply current
: 500 mA
Ignition key
switch
Car fuse box
(Main fuse)
+
Battery
12 | Quick Start Guide
Connect to the vehicle's parking brake detection switch harness.
iPod
AUDIO OUT
Microphone
(Accessory7)
(KIV-BT900 only)
To front right speaker
Car fuse
box
–
Parking sensor wire (Light Green)
iPod
VIDEO OUT
Microphone input
(KIV-BT900 only)
To front left speaker
To rear left speaker
To rear right speaker
ACC
Ignition wire (Red)
Battery wire (Yellow)
Ground wire (Black) · (To car chassis)
USB connector (1m)
iPod audio output
(Left: White, Right: Red)
iPod visual output
(Yellow)
White
White/Black
Gray
Gray/Black
Green
Green/Black
Purple
Purple/Black