Bticino Linea 5000 345000 Installation And Configuration Manual
  1. Manuals
  2. Brands
  3. Bticino Manuals
  4. Intercom System
  5. Linea 5000 345000
  6. Installation and configuration manual
Bticino Linea 5000 345000 Installation And Configuration Manual

Bticino Linea 5000 345000 Installation And Configuration Manual

Hide thumbs
Table of Contents

Advertisement

Quick Links

Download this manual
345000
Linea 5000
Installation and configuration manual
CLICK HERE
Home + Project
RA00224AA_EN-11/24-PC
www.bticino.com

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the Linea 5000 345000 and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Related Manuals for Bticino Linea 5000 345000

Summary of Contents for Bticino Linea 5000 345000

  • Page 1 345000 Linea 5000 Installation and configuration manual CLICK HERE Home + Project RA00224AA_EN-11/24-PC www.bticino.com...
  • Page 2 Linea 5000 Installation and configuration manual Home + Project...
  • Page 3 Linea 5000 Installation and configuration manual Guide to reading the manual Welcome to the manual reading guide. This section has been created to give you a clear and complete understanding of the contents of this manual. By following these guidelines, you can maximise the effectiveness of your learning and user experience.

  • Page 4: Table Of Contents

    Linea 5000 Installation and configuration manual Contents General information Warnings and recommendations Preliminary requirements Minimum PC and Smartphone Requirements Network requirements Installation Front view Rear view Dimensional data and installation heights Mounting Disassembling Fundamental concepts Acronyms Devices Home + Project App Type of system users Residents Staff...
  • Page 5 Linea 5000 Installation and configuration manual Entrances ("Building manager” user) Audio parameters Appearance Synchronisation Residents Apartment management Contact Input Badge Access code Badge Create a resident badge Create a staff badge Guard station Additional services Staff Temporary staff Regular staff Messages Parameters and settings Structure...

  • Page 6: General Information

    BTicino accepts no responsibility for any faults. We would like to inform you that the service provided by BTicino by means of remote use via the apps involves the use of data. The cost linked to data usage depends on the type of contract which the customer has with his ISP (Internet Service Provider) and is solely the customer’s responsibility.

  • Page 7: Preliminary Requirements

    Linea 5000 Installation and configuration manual Preliminary requirements Minimum PC and Smartphone Requirements SMARTPHONE REQUIREMENTS: • ANDROID®: it requires Android® 10 and later • iOS: it requires an iPhone or iPad running iOS 12.0 or later PC REQUIREMENTS (for Desktop tool version): •...

  • Page 8: Installation

    Linea 5000 Installation and configuration manual Installation Front view 1. Locking screws for finishing frame 2. Viewing field lighting LED 3. Camera 4. Proximity sensor receiver 5. Lighting sensor 6. Microphone 7. Proximity sensor emitter 8. Touch display 7" 9. RFID badge reader 10.

  • Page 9: Rear View

    Rear view For UK only: Great King Street North B19 2LF 345000 (1-2) OFF RESET BTICINO SpA Viale Borri, 231 21100 VARESE ITALY Made in Italy ETHERNET 1. Clamp for local power supply. 2. BUS clamp. 3. Clamp for local door release pushbutton.

  • Page 10: Dimensional Data And Installation Heights

    Linea 5000 Installation and configuration manual Dimensional data and installation heights 42 mm 4,5 mm 128 mm Sfera Robur Tegui Fixing points of the frame to the box 100 cm 92 ° 50 cm 160 cm 50 cm 170 cm 119 °...

  • Page 11: Mounting

    Linea 5000 Installation and configuration manual Mounting 90°...
  • Page 12 Linea 5000 Installation and configuration manual 345101/02/03/04/05 345131/32/33/34/35 Item to be purchased separately. To avoid damages, end the operation as soon as the screws reach the end of travel.

  • Page 13: Disassembling

    Linea 5000 Installation and configuration manual Disassembling...
  • Page 14 Linea 5000 Installation and configuration manual GO TO THE NEXT STEP...

  • Page 15: Fundamental Concepts

    Linea 5000 Installation and configuration manual Fundamental concepts Viale Borri, 231 Message For deliveries, please leave the package in the room near the stairs on the ground floor. Thank you There are several ways to configure devices, particularly the entrance panel. The recommended method to make the most of the system features can be split into 2 phases: At the office Most configurations (system creation, structure creation, compiling the address book, badge and...

  • Page 16: Acronyms

    Linea 5000 Installation and configuration manual Acronyms In this manual, for easy reading, the abbreviated device name is used as in the list. – EP : Linea 5000 display module item 345000 Keypad: Linea 5000 additional keypad module item 345500 –...

  • Page 17: Type Of System Users

    Linea 5000 Installation and configuration manual Type of system users Two types of users are enabled to configure and manage the devices: Installer This user has access to all the functions and is the user who will follow the installation to the end, from structure to residents, to device parameters. The installer cannot invite/remove users with administrator rights.

  • Page 18: Home+Security

    Linea 5000 Installation and configuration manual Home+Security Home+Project Only if the EP is connected to the Internet ICON LEGEND Installer user Building manager user Resident Home+Security invited user...

  • Page 19: Use Of Ep

    Linea 5000 Installation and configuration manual Use of EP Search contact Concierge Viale Borri, 231 Message Message For deliveries, please leave the package in the room near the stairs on the ground floor. Thank you Call Address book Access A Time. Welcome message (see section for setting) C Manager message (see section for setting) 1.

  • Page 20: Call An Apartment Using Address Book

    Linea 5000 Installation and configuration manual Call an apartment using address book Concierge Search contact Concierge Calling code Call Address book Access Call Address book Access 1. Touch to open the address book page. 2. Touch to call the desired resident. Dillon Dillon Caroline...
  • Page 21 Linea 5000 Installation and configuration manual Opening entrance Dillon Dillon Caroline Caroline Speaking End call Call again Exit 5. The resident has opened the door lock (A). 6. The call is ended, recall (A) or exit (B).

  • Page 22: Call An Apartment Using A Code (Numeric O Alphanumeric)

    Linea 5000 Installation and configuration manual Call an apartment using a code (numeric o alphanumeric) Numeric code Alphanumeric Code Concierge Calling code Calling code Call Address book Access Call Address book Access 1. Enter the numeric or alphanumeric code which corresponds to the resident to be called. 2.
  • Page 23 Linea 5000 Installation and configuration manual Opening entrance Speaking End call Call again Exit 5. The resident has opened the door lock (A). 6. The call is ended, recall (A) or exit (B).

  • Page 24: Call An Apartment Using Block/Riser/Floor/Apartment

    Linea 5000 Installation and configuration manual Call an apartment using Block/Riser/Floor/Apartment APARTMENT BLOCK 1 Apartment 1 Apartment 2 Apartment 1 Apartment 2 Device Device Device Device Apartment 1 Apartment 2 Apartment 1 Apartment 2 Device Device Device Device Apartment 1 Apartment 2 Apartment 1 Apartment 2...
  • Page 25 Linea 5000 Installation and configuration manual 1142 1142 Speaking Speaking End call 3. The call is in progress, touch to end if necessary (A). 4. The resident has answered. Opening entrance 1142 1142 Speaking End call Call again Exit 5. The resident has opened the door lock (A). 6.

  • Page 26: Call The Guard Station

    Linea 5000 Installation and configuration manual Call the guard station Concierge Calling code Call Address book Access 1. Touch to the call the guard station. Concierge Concierge Calling Speaking End call 2. The call is in progress, touch to end if necessary (A). 3.
  • Page 27 Linea 5000 Installation and configuration manual Opening entrance Concierge Concierge Speaking End call Call again Exit 4. The resident has opened the door lock (A). 5. The call is ended, recall (A) or exit (B).

  • Page 28: Access Using A Code

    Linea 5000 Installation and configuration manual Access using a code Concierge Riser light Calling code Entrance Entrance Call Address book Access Call Address book Access 1. Touch to open the access page. A Switches the riser light on. 2. Select the entrance. 3.

  • Page 29: Access Using A Badge

    Linea 5000 Installation and configuration manual Access using a Badge 1. Place the badge in front of the EP in correspondence with the RFID reader. Opening entrance 2. The entrance is open.

  • Page 30: Quick Configuration Guide

    Linea 5000 Installation and configuration manual Quick configuration guide Attention: the following procedure describes the minimum steps for an initial configuration of the Linea 5000. However, we recommend that you improve your knowledge of the system by reading the entire manual. The steps for the correct programming of the system using Home+Project are as follows: AT THE OFFICE ON THE SYSTEM...

  • Page 31: Download The Home+Project App

    Linea 5000 Installation and configuration manual Download the Home+Project app To be able to configure the system so that the user can use all the functions that the MyHOME system puts at your disposal, first of all download the app from the Stores (for iOS® smartphone and tablet from app Store, for Android®...

  • Page 32: Account Registration On The Installer Cloud

    After confirming, the system will send the data (verification code) to the email address indicated by you in the registration phase for the first access. We have sent a verification code to your email J.Smith@bticino.com Please fill in the field below. VERIFICATION CODE...
  • Page 33 Linea 5000 Installation and configuration manual Fill in the fields bellow to complete the creation of your account. PASSWORD CONFIRM LA PASSWORD FIRTNAME LASTNAME COUNTRY Italia I have read and agree to the terms and conditions and to the provacy policy Keep in touch with us and join our mailing list to receive occasional Legrand news by email...

  • Page 34: Forgotten Password

    2. Enter the email address where the system can send a verification code. 3. Touch to confirm the forwarding of the verification code. We have sent a verification code to your email J.Smith@bticino.com Please fill in the field below. VERIFICATION CODE...

  • Page 35: Authentication

    Linea 5000 Installation and configuration manual Enter a secure password that you don't use for other websites. NEW PASSWORD NEW PASSWORD CONFIRM NEW PASSWORD EMAIL Confirm new password Email PASSWORD Continue Password Forgotten password? SIGN IN Don't have an account? Sign up sign up now 6.

  • Page 36: App Home Page

    Linea 5000 Installation and configuration manual App Home Page In this page, it is possible to search, view and manage all the available systems, as well as create new ones. You can also access some settings related to the Home+Project app and update the firmware of the devices.

  • Page 37: System Creation And First Configuration

    Linea 5000 Installation and configuration manual System creation and first configuration The procedure for creating the system is different depending on the type of call you want to configure in the system. – Call using the Address book. – Call using the Code or the code plus Address book. Call using the Block/Riser/Floor/Apartment sequence.
  • Page 38 Linea 5000 Installation and configuration manual Create entrance plant Set up the plant Create a new plant group Cancel Insert the friendly name Insert the name of the new plant DEVICE LANGUAGE English PLANT GROUP NAME PLANT NAME Call mode Help 21 characters left TYPE...
  • Page 39 Linea 5000 Installation and configuration manual Create the structure Add the gates Set up the buildings and the Set up the number of the gates related apartments Entries Building 1 Change Apartments 4 Building 2 Change Apartments 4 CONTINUE CONTINUE 18.
  • Page 40 Linea 5000 Installation and configuration manual “Pini” apartment block Plant activation Cancel Change Select the devices you you want to commissioning Not active ENTRANCE PANEL OF THE PLANT 0/1 PE configured Help Linea 5000 - Entrance 1 Entries Residents Badge Switchboard Additional services Parameters and settings...

  • Page 41: Configuration In Code Or Code Plus Address Book Call Mode

    Linea 5000 Installation and configuration manual Configuration in Code or Code plus Address Book call mode Plants Search Type of plant Create entrance plant Cancel Which type of plant are you configuring? Insert the name of the new plant PLANT NAME “Pini”...
  • Page 42 Linea 5000 Installation and configuration manual Set up the plant System parameters DEVICE LANGUAGE English Call mode Help TYPE Address book The user will select the resident to be called from a list of names Call with code The user will call the resident by entering the code assigned to the appartment Building | Riser | Floor | Apartment The user will call the resident by entering the code defined by...
  • Page 43 Linea 5000 Installation and configuration manual Create the structure Add the gates Set up the buildings and the Set up the number of the gates related apartments Entries Building 1 Change Apartments 4 Building 2 Change Apartments 4 CONTINUE CONTINUE 20.
  • Page 44 Linea 5000 Installation and configuration manual “Pini” apartment block Plant activation Cancel Change Select the devices you you want to commissioning Not active ENTRANCE PANEL OF THE PLANT 0/1 PE configured Help Linea 5000 - Entrance 1 Entries Residents Badge Switchboard Additional services Parameters and settings...

  • Page 45: Configuration In Block/Riser/Floor/Apartment Call Mode

    Linea 5000 Installation and configuration manual Configuration in Block/Riser/Floor/Apartment call mode. Plants Search Type of plant Create entrance plant Cancel Which type of plant are you configuring? Insert the name of the new plant PLANT NAME Domotic and smart home “Pini”...
  • Page 46 Linea 5000 Installation and configuration manual Set up the naming of the blocks Define the denomination of the Buildings Numbers (1,2,3) Letters (A,B,C) Define the denomination of the Risers Numbers (1,2,3) Letters (A,B,C) Define the denomination of the Floors Numbers (1,2,3) Letters (A,B,C) Define the denomination of the Apartments Numbers (1,2,3)
  • Page 47 Linea 5000 Installation and configuration manual Create the structure Set up the risers of Building 1 Set up the risers Set up the buildings and the related apartments Risers of Building 1 Building 1 Change NAME OF RISER A Apartments 4 Riser A Building 2 Change...
  • Page 48 Linea 5000 Installation and configuration manual Set up the risers of Building 2 Calling code recap Add the gates Set up the risers Basing on the configuration created, this is the code Set up the number of the gates which will be inserted: Risers of Building 2 Entries NAME OF RISER A...
  • Page 49 Linea 5000 Installation and configuration manual Gate-building association Select buildings associated with gate 1 THE BUILDINGS ARE Building 1 Building 2 FOR BUILDING 1 THEY HANDLE Tutte le scale Riser A FOR BUILDING 2 THEY HANDLE CONTINUE 36. Select the buildings (with their apartments) to which this entrance is associated. 37.

  • Page 50: System Management

    Linea 5000 Installation and configuration manual System management This menu allows to manage your system and its connected users. Plants Plants Search Search “Pini” apartment block “Pini” apartment block Viale Borri 231, Varese 21100 Viale Borri 231, Varese 21100 Actions Restore from backup Export plant details Add and remove users...

  • Page 51: System Sharing

    Basic Concepts. It is good practice to split the two roles according to the following procedure. Plants Search Plant sharing Cancel USERS Invite J.Smith@bticino.com “Pini” apartment block Building Admin Viale Borri 231, Varese 21100 J.Brown@bticino.com Installer Actions Restore from backup...
  • Page 52 Cancel Cancel USERS Invite Insert email address of the user you want to invite Insert email address of the user you want to invite ROLE ROLE J.Smith@bticino.com Building Admin Building Admin Building Admin, Installer Role USER EMAIL J.Brown@bticino.com Building Admin...
  • Page 53 Cancel Cancel Cancel USERS Insert email address of the user you want to invite Insert email address of the user you want to invite Invite ROLE ROLE J.Smith@bticino.com Installer Building Admin Building Admin J.Brown@bticino.com Role USER EMAIL Building Admin F.Taylor@bticino.com...

  • Page 54: Remove User

    Linea 5000 Installation and configuration manual Remove user Plant sharing Plant sharing Plant sharing Cancel Cancel Cancel USERS USERS USERS Invite Invite Invite J.Smith@bticino.com J.Smith@bticino.com J.Smith@bticino.com Installer Installer Installer J.Brown@bticino.com J.Brown@bticino.com J.Brown@bticino.com Building Admin Building Admin Building Admin F.Taylor@bticino.com F.Taylor@bticino.com F.Taylor@bticino.com...

  • Page 55: Delete The System

    Linea 5000 Installation and configuration manual Delete the system With this procedure, you can delete an existing system. Plants Plants Plants Search Search Search Plant deleted Tutti “Pini” apartment block “Pini” apartment block Viale Borri 231, Varese 21100 Viale Borri 231, Varese 21100 Actions Plant deletion Are you sure to delete “Pini”...

  • Page 56: App Settings

    In this page, it is possible to access some settings of your account and update the device firmware. It is also possible to log out from the Home+Project app. Plants Settings Search J.Smith@bticino.com “Pini” apartment block MORE Viale Borri 231, Varese 21100 Help...

  • Page 57: Account Management

    C Edit some parameters related to your account security, such as password and logging out of all BTicino devices using the same account. D Authorise the sharing of data to help improve the product. Manage your communication authorisations and other aspects of your personal details.
  • Page 58 Legrand account. My account Name James Surname Smith Display name James Smith Email J.smith@bticino.com Country Italia Language English We will use this language to communicate with you (email, ..) Remove account A View/edit the name used for the account.
  • Page 59 Linea 5000 Installation and configuration manual Email/account (change of the device management email/account) To change the access email address: My account My account My account Name Name J.smith@bticino.com James Jhon Surname Surname My new email Smith J.brown@bticino.com Brown Confirm new email...
  • Page 60 Brown You will also loose all data associated with these applications. If you are aware of what you are doing, type your password and confirm your choice. Display name Jhon Brown E-mail J.brown@bticino.com PASSWORD Your password Country Italia Language English We will use this language to communicate with you (email, ..)

  • Page 61: Edit Password

    A Completes the password change procedure. Disconnects from all devices. Edit password My account My account My account Change password J.brown@bticino.com J.smith@bticino.com J.brown@bticino.com Account security Current password Current password In case of loss or theft of your devices, you can disconnect...
  • Page 62 Linea 5000 Installation and configuration manual Disconnect from all devices My account My account Change password Change password Account security Account security In case of loss or theft of your devices, you can disconnect In case of loss or theft of your devices, you can disconnect your account from all devices.

  • Page 63: Legal Information

    The management of cookies intended for other purposes is done in the applications. 1. Touch to accept communications from Netatmo/Legrand/BTicino. Legal information In this page it is possible to view terms and conditions of use and privacy information for each app to which your Legrand account is associated.
  • Page 64 Linea 5000 Installation and configuration manual Partner apps In this page it is possible to display all the third parties to whom you granted rights to operate on your connected devices. (e.g. Google home, etc.) My account You have authorized these applications to access data in your account.

  • Page 65: Help

    NOTE: you will not receive a direct answer, but your signal will be used by developers to improve the service. Settings Help Report a problem DESCRIBE THE PROBLEM Report a problem J.Smith@bticino.com MORE Help Licenses Your report will be used by our developers to improve the service DEVICE FIRMWARE Update center...

  • Page 66: Update Center

    If it is connected to a network, the device downloads the updates automatically. It will then only be necessary to send the installation command from the app (see steps 6 to 10 of the procedure). Plants Settings Search Update center Tutti J.Smith@bticino.com Smart Home Residential Classe300EOS Download Now MORE latest: 3.0.5...
  • Page 67 Linea 5000 Installation and configuration manual Plants Search Update center Update center “Pini” apartment block Change Smart Home Residential New firmware for Linea 5000 Install ready to install Linea 5000 “Pini” apartment block Already downl... Synchronized latest: 1.0.6 I Release notes Viale Borri 231, Varese 21100 No changes to sync Synchronize...
  • Page 68 Linea 5000 Installation and configuration manual Update later “Pini” apartment block Entries Entrance 1 Change ... Other Entrance 1 Linea 5000 - Entrance 1 New firmware Linea 5000 Install New firmware 2.0.06 available ready to install 1 device to be updated Synchronized No changes to sync Synchronize...

  • Page 69: System Home Page

    Linea 5000 Installation and configuration manual System Home Page In this page are available all the functions for managing the system. It is possible to: – manage the entrances of the structure by connecting EP and other devices; – create and manage apartment residents and access; –...

  • Page 70: Entrances ("Installer" User)

    Linea 5000 Installation and configuration manual Entrances ("Installer” User) system creation and first This section can be used to manage the entrances configured during the configuration. In particular, you can: – Manage the entrances – Associate the devices with the entrances –...

  • Page 71: Edit The Entrance

    Linea 5000 Installation and configuration manual Edit the entrance Entries Entrance 1 ... Other Linea 5000 - Entrance 1 Entrance 1 Linea 5000 Entrance 2 1 devices to end configuration 1. Select the entrance to edit. 2. Touch to open the entrance edit menu. Entrance 1 Edit gate Gate-building association...

  • Page 72: Associate The Devices With The Entrances

    Linea 5000 Installation and configuration manual Associate the devices with the entrances The procedure for association with entrance devices depends on the type of device: – Association with the EP – Association with the keypad Association with an RFID. – Fundamental concepts For the differences among the various modules, see ATTENTION: A project must always have an entrance with EP;...
  • Page 73 Linea 5000 Installation and configuration manual Properties Set up the system parameters RISER INTERFACE (BT-346851) "M" ADDRESS MULTIPLE CALL It allows to set the number of call repetitions if the call is not answered If your plant includes riser interfaces (BT-346851) remember to power off and power on them once the entrance panel is configured.
  • Page 74 Linea 5000 Installation and configuration manual Set up the audio parameters CALL AND LOCK FEEDBACK TONES Acoustic tones Call and door lock feedbacks tones with standard tones Vocal messages Call and door lock feedbacks tones with vocal messages Empty Call and door lock feedbacks tones disabled Type of call signal (S) Set of the internal unit ringtone Back...
  • Page 75 Linea 5000 Installation and configuration manual Set up the appearance Set up the appearance It shows the call page immediately It shows the call page immediately Enabled with customizable message Enabled with customizable message It shows a starting page with a custom message It shows a starting page with a custom message Enabled with background image Enabled with background image...
  • Page 76 Linea 5000 Installation and configuration manual Now you can decide to connect with the EP now or later, for example if you are setting it up while at the office. CONNECT LATER Linea 5000 Entrance 1 ... Other Linea 5000 - Entrance 1 Configuration to end How to connect to the entrance panel Before start be sure the bluetooth of your...
  • Page 77 Linea 5000 Installation and configuration manual Product setup Setup code Scan this QRcode with Home + Project app to connect to the Entrance Panel and configure it. Continue Demo mode 26. When switched on for the first time, the device shows the language selection screen: touch to select the language.
  • Page 78 Linea 5000 Installation and configuration manual Connection to the entrance panel Scan the QR Code on the screen of the entrance panel 30. Using the smartphone, scan the QR Code. Connected CONFIGURE 31. The device has been detected: touch to start the configuration.
  • Page 79 Linea 5000 Installation and configuration manual The procedure is now complete, and the settings have been synchronised with the device. If changes are made to the parameters, the above procedure must be repeated, saving and sending the updated information via Bluetooth. These parameters are not sent with the synchronisation procedure (A), which is only for the address book.

  • Page 80: Association With The Keypad

    Linea 5000 Installation and configuration manual Association with the keypad “Pini” apartment block Change Entries Entrance 2 ... Other Entrance 1 Keypad - Entrance 2 Not active Configuration to end 1 devices to end configuration 0/1 PE Configured Entrance 2 Help 1 devices to end configuration Entries...
  • Page 81 Legrand Electric Ltd Great King Street North Birmingham B19 2LF Made in Italy 345520 BTICINO SpA Viale Borri, 231 21100 VARESE ITALY C NC NO CP P1 RESET 5. Briefly press the reset button on the back of the keypad.
  • Page 82 Linea 5000 Installation and configuration manual Properties Connected LOCK TIMING (T) Length of time during which the relay of the associated door lock remains active LOCK PUSHBUTTON If enabled, the module will manage the local pushbutton for the opening of the lock CONFIGURE SAVE Back...

  • Page 83: Association With An Rfid

    Linea 5000 Installation and configuration manual Association with an RFID “Pini” apartment block Entries Entrance 2 Change ... Other Entrance 1 Smart reader - Entrance 2 Not active Configuration to end 1 devices to end configuration 0/1 PE configured Entrance 2 Help 1 devices to end configuration Entries...
  • Page 84 Legrand Electric Ltd Great King Street North Birmingham B19 2LF Made in Italy 345520 BTICINO SpA Viale Borri, 231 21100 VARESE ITALY C NC NO CP P1 RESET 5. Briefly press the reset button on the back of the RFID.
  • Page 85 Linea 5000 Installation and configuration manual Properties Connected LOCK TIMING (T) Length of time during which the relay of the associated door lock remains active LOCK PUSHBUTTON If enabled, the module will manage the local pushbutton for the opening of the lock CONFIGURE Back SAVE...

  • Page 86: Manage The Devices Associated With The Entrances

    Linea 5000 Installation and configuration manual Manage the devices associated with the entrances This section can be used to manage devices, performing various functions such as updating the firmware, changing or deleting and resetting the device. It is also possible to enable on the device a menu containing settings that can be set using the device.

  • Page 87: Firmware Update

    Connection Wi-Fi Wi-Fi Assistant Available networks Connection in progress BTicino 00 Now you need to connect your smartphone to the Wi-Fi network manually. After that you can return to the app and Connected continue the configuration. In case of connection problems, please remove the network from the list of saved networks.

  • Page 88: Show The Settings On The Device (Only For Ep)

    Linea 5000 Installation and configuration manual Show the settings on the device (only for EP) This function can be used to display on the device a menu with various settings. Entrance 1 ... Other Linea 5000 - Entrance 1 Linea 5000 Action Product setup Firmware update...

  • Page 89: Device Reset

    Linea 5000 Installation and configuration manual Device reset This function resets the device from the app. Additional reset is possible directly from the device: see Configurations from device. Entries Entrance 1 Entrance 1 ... Other ... Other Linea 5000 - Entrance 1 Linea 5000 - Entrance 1 Entrance 1 Linea 5000...

  • Page 90: Modify The Device

    Linea 5000 Installation and configuration manual Modify the device This function can be used to change various device parameters. Name and properties Entrance 1 ... Other Linea 5000 - Entrance 1 Linea 5000 RISER INTERFACE (BT-346851) "M" ADDRESS No riser SECONDARY LOCK ACTUATOR If enabled, it will be possible to control an additional lock with the actuator with its...

  • Page 91: Entrances ("Building Manager" User)

    Linea 5000 Installation and configuration manual Entrances ("Building manager” user) In this section, it is possible to edit some parameters of the entrances associated with the devices. “Pini” apartment block Entries Change Entrance 1 Synchronized Synchronize No changes to sync Last sync: 22/07/2024 09:26 Buildings...

  • Page 92: Audio Parameters

    Linea 5000 Installation and configuration manual Audio parameters Access code Cancel CALL AND LOCK FEEDBACK TONES Acoustic tones Call and door lock feedbacks tones with standard tones Vocal messages Call and door lock feedbacks tones with vocal messages None Call and door lock feedbacks tones disabled SAVE 1.

  • Page 93: Appearance

    Linea 5000 Installation and configuration manual Appearance Access code Cancel WELCOME PAGE Disabled It shows the call page immediately Enabled with customizable message It shows a starting page with a custom message Enabled with background image It shows a starting page with a custom image SCREEN INTERFACE Automatic Dark Mode...
  • Page 94 Linea 5000 Installation and configuration manual Access code Cancel WELCOME PAGE Disabled It shows the call page immediately Enabled with customizable message It shows a starting page with a custom message Enabled with background image It shows a starting page with a custom image SCREEN INTERFACE Automatic Dark Mode...

  • Page 95: Synchronisation

    Linea 5000 Installation and configuration manual Synchronisation After completing the first entrance association, in case of changes to the project, it will be possible to update the device using the "synchronise" button. When using this function, the smartphone will connect via Bluetooth to the device and send the changes.
  • Page 96 Linea 5000 Installation and configuration manual “Pini” apartment block “Pini” apartment block “Pini” apartment block “Pini” apartment block Change Change Change Change Change New changes New changes New changes New changes New changes to sync to sync to sync to sync to sync Synchronize Synchronize...

  • Page 97: Residents

    Linea 5000 Installation and configuration manual Residents This section can be used to manage the entrances configured during the system creation and first configuration. Residents “Pini” apartment block Change ... Other Synchronized Search No changes to sync Synchronize Last sync: Building 1 Building 2 22/07/2024 09:26...

  • Page 98: Apartment Management

    Linea 5000 Installation and configuration manual Apartment management When creating the system, a structure is also created, which varies according to the type of call. The lowest level of the structure is the apartment. A default resident is created for each flat, to which a name is assigned, together with an IU SCS address in sequential order.
  • Page 99 Linea 5000 Installation and configuration manual Add a resident (only Address book call type) PRIVATE BUSINESS Apartment 1 Add label Add label Cancel Cancel TYPE TYPE Contact Entrance Badge Access co Private Private Labels Change Business Business Parameters COMPANY NAME (MAX 40 CHARACTERS) LINE 1 (MAX 25 CHARACTERS) SCS ADDRESS LINE 2 (MAX 25 CHARACTERS)
  • Page 100 Linea 5000 Installation and configuration manual Edit a resident Apartment 1 Edit label Apartment 1 Cancel TYPE Contact Entrance Badge Access co Contact Entrance Badge Access co Private Labels Labels Change Change Business Parameters Parameters LINE 1 (MAX 25 CHARACTERS) SCS ADDRESS SCS ADDRESS LINE 2 (MAX 25 CHARACTERS)
  • Page 101 Linea 5000 Installation and configuration manual Invite a resident This procedure allows a resident to use the Home+Security app to. – Open the door lock via Bluetooth. – Manage the own apartment labels (add/remove/change) via Bluetooth, or remotely if the EP is connected.
  • Page 102 Building 2 Building 3 Building 1 Building 2 Building 3 Building 1 Building 2 Building 3 Apartment 1 - 1 J.Brown@bticino.com Apartment 1 Apartment 1 Apartment 2 - 2 F.Taylor@bticino.com Apartment 2 Apartment 2 Apartment 3 - 3 Apartment 3 R.Evans@bticino.com...

  • Page 103: Input

    Linea 5000 Installation and configuration manual Input Residents Apartment 1 Apartment 1 Other Contact Entrance Badge Access co Contact Entrance Badge Access co Search Select the gates where enable the access Labels Building 1 Building 2 Entrance 1 Change Apartment 1 Parameters Apartment 2 SCS ADDRESS...

  • Page 104: Badge

    Linea 5000 Installation and configuration manual Badge Residents Apartment 1 Apartment 1 Other Contact Entrance Badge Access co Contact Entrance Badge Access co Search Labels Building 1 Building 2 Change No badges added. Apartment 1 Click on « add » to associated a new one Parameters Apartment 2 SCS ADDRESS...
  • Page 105 Linea 5000 Installation and configuration manual Associate the badge by reading it using the smartphone NFC sensor This function requires a smartphone that supports NFC connection, which must be enabled. Apartment 1 Contact Entrance Badge Access co No badges added. Click on «...
  • Page 106 Linea 5000 Installation and configuration manual Associate the badge by reading it using the EP RFID badge reader To use this function, the EP must be associated with the app. Apartment 1 Add badges Cancel Contact Entrance Badge Access co No badges added.
  • Page 107 Linea 5000 Installation and configuration manual Apartment 1 Contact Entrance Badge Access co Remove SAVE 3. The badge has been added and associated with the apartment. A Delete the badge association. 4. Touch to save. Associate the badge by entering its code Apartment 1 Add badge manually Apartment 1...

  • Page 108: Access Code

    Linea 5000 Installation and configuration manual Access code Residents Apartment 1 Apartment 1 Other Contact Entrance Badge Access co Contact Entrance Badge Access co Search ACCESS CODE INSTRUCTION Labels Building 1 Building 2 - The code length is 5 numbers - The code entered must be different for each apartment - The code can’t contain consecutive numbers (e.g.
  • Page 109 Linea 5000 Installation and configuration manual Apartment 1 Apartment 1 Contact Entrance Badge Access co Contact Entrance Badge Access co ACCESS CODE INSTRUCTION ACCESS CODE INSTRUCTION - The code length is 5 numbers - The code length is 5 numbers - The code entered must be different for each apartment - The code entered must be different for each apartment - The code can’t contain consecutive numbers (e.g.

  • Page 110: Badge

    Linea 5000 Installation and configuration manual Badge This section can be used to manage all the system badges created in the individual apartments, or to create new ones. When creating badges in this section, you can decide to assign them to residents or staff (temporary or periodic).

  • Page 111: Create A Resident Badge

    Linea 5000 Installation and configuration manual Create a resident badge These types of badges are linked to an apartment. Badge Badge Add badges Cancel Select the apartment to associate Search Search Building 1 Building 2 Remove Remove Apartment 1 Apartment 1 Apartment 1 Remove Remove...

  • Page 112: Create A Staff Badge

    Linea 5000 Installation and configuration manual Create a staff badge The creation of this type of badge is only possible if you have previously created a permanent staff profile (see additional services/staff for details). Badge Badge Add badges Cancel Select the guest to associate Search Search Gardener...

  • Page 113: Guard Station

    Linea 5000 Installation and configuration manual Guard station This section is used to set the presence of one or more guard stations in the system NOTE: this function is not available for the "Building Manager" user “Pini” apartment block Switchboard Add switchboard Change Cancel...

  • Page 114: Additional Services

    Linea 5000 Installation and configuration manual Additional services This section can be used to create staff profiles and messages to send to the EP. “Pini” apartment block Additional services Change Staff Synchronized No changes to sync Synchronize Last sync: Messages 22/07/2024 09:26 Entries Residents...

  • Page 115: Staff

    Linea 5000 Installation and configuration manual Staff There are two types of staff profiles: – Temporary staff which can be used to allow entry using a code at a specific date and for a certain period of time. – Periodic staff , which can be used to allow entry using a code or a badge at a specific date (single day or period) repeated regularly for certain days of the week or for a certain period of time.

  • Page 116: Temporary Staff

    Linea 5000 Installation and configuration manual Temporary staff Badge Create one time staff Cancel Entrance Access code Contact DESCRIPTION (MAX 25 CHARACTERS) Plumber NO STAFF YET Click on « + » button to add Action One time staff CREATE Periodic staff 1. Touch to create a temporary staff. 2.

  • Page 117: Regular Staff

    Linea 5000 Installation and configuration manual Create one time staff Staff Cancel Contact Entrance Access code Active Expired ACCESS CODE INSTRUCTION Plumber Change - The code length is 5 numbers Jul 27, 2024 - The code can’t contain consecutive numbers (e.g. 1234) - The code can’t contain only the same number (e.g.
  • Page 118 Linea 5000 Installation and configuration manual Create periodic staff Create periodic staff Create periodic staff Cancel Cancel Cancel Contact Entrance Badge Access co Contact Entrance Badge Access co Contact Entrance Badge Access co Select the gates where enable the access Select the gates where enable the access Select the gates where enable the access Entrance 1...
  • Page 119 Linea 5000 Installation and configuration manual Set the badge Create periodic staff Create periodic staff Add badges Cancel Cancel Cancel Contact Entrance Badge Access co Contact Entrance Badge Access co No badges added. No badges added. Click on « add » to associated a new one Click on «...
  • Page 120 Linea 5000 Installation and configuration manual Create periodic staff Staff Cancel Expired Contact Entrance Badge Access co Active ACCESS CODE INSTRUCTION Plumber Edit - The code length is 5 numbers Jul 27, 2024 - The code can’t contain consecutive numbers (e.g. 1234) - The code can’t contain only the same number (e.g.

  • Page 121: Messages

    Linea 5000 Installation and configuration manual Messages This section can be used to create messages that will appear on the display of the EPs. Additional services Messages Messages Active Expired Active Expired Staff mail mail Edit Change Messages Sep 1, 2024 08:00 am - Sep 30, 10:00 pm Aug 1, 2024 08:00 am - Aug 31, 10:00 pm 1.
  • Page 122 Linea 5000 Installation and configuration manual New message Messages Cancel Content Active Expired TITLE (Max 20 characters) Mail Change Sep 1, 2024 08:00 am - Sep 30, Meeting invitation 10:00 pm Meeting invitation TEXT Change Sep 1, 2024 08:00 am - Sep 30, 10:00 pm Resident meeting on 30/09/24 at 08:30 pm in the meeting room of the apartment block...

  • Page 123: Parameters And Settings

    Linea 5000 Installation and configuration manual Parameters and settings In this section it is possible to configure different device parameters. “Pini” apartment block Parameters and settings Change Structure Synchronized No changes to sync Synchronize Last sync: Devices info 22/07/2024 09:26 Device language Entries Call mode...

  • Page 124: Structure

    Linea 5000 Installation and configuration manual Structure This section can be used to modify the structure created during the initial system configuration. Depending on the type of call set up, the pages will have a different appearance and content. Parameters and settings Structure Devices info Device language...

  • Page 125: Device Info

    Linea 5000 Installation and configuration manual Device info This section can be used to display some system device data Parameters and settings Devices info Structure Linea 5000 - Entrance 1 FIRMWARE VERSION Devices info MAC ADDRESS Device language Linea 5000 - Ingresso 2 Call mode FIRMWARE VERSION Access code...

  • Page 126: Call Modes

    Linea 5000 Installation and configuration manual Call modes In this section, it is possible to edit some call mode parameters. Depending on the type of call set up, the pages will have a different appearance and content. Parameters and settings Structure Devices info Device language...

  • Page 127: Access Code

    Linea 5000 Installation and configuration manual Access code This section can be used to change the length of the access code and enable the Passepartout code, which allows to have a unique code to open all apartments. Set the same code for the whole system Parameters and settings Access code Cancel...
  • Page 128 Linea 5000 Installation and configuration manual Set the same code for the each building Access code Cancel LENGTH PASSPARTOUT If enabled, the access code is the same one for every apartment or building Same one for the whole plant Different for each building ACCESS CODE INSTRUCTION - The code length is 5 numbers - The code can’t contain consecutive numbers (e.g.

  • Page 129: System Activation

    Linea 5000 Installation and configuration manual System activation *NOTE: function not available for the "Building manager” user. This section can be used to enable/disable the system devices. In order to be considered active, the system must have completed the configuration of all EPs selected as active on this page.
  • Page 130 Linea 5000 Installation and configuration manual Entries Name and properties Entrance 1 1 devices to end configuration Entrance 2 RISER INTERFACE "M" ADDRESS 1 devices to end configuration No riser SECONDARY LOCK ACTUATOR If enabled, it will be possible to control an additional lock with the actuator with its specific SCS address SCS ADDRESS...
  • Page 131 Linea 5000 Installation and configuration manual “Pini” apartment block Parameters and settings Change Structure Synchronized Synchronize No changes to sync Last sync: Devices info 22/07/2024 09:26 Device language Entries Call mode Residents Access code Plant activation Badge 2/2 Entrance Panel Active Network Switchboard...

  • Page 132: Network

    Linea 5000 Installation and configuration manual Network or Ethernet). This section can be used to connect the device to a network (Wi-Fi The connection to the network allows the configuration to be completed remotely. Not all configurations can be completed remotely: if remote configuration is not possible, a message alerts the user by asking to stand close to the device and send any changes manually via Bluetooth connection.
  • Page 133 Linea 5000 Installation and configuration manual Parameters and settings PASSWORD WIFI Connecting Cancel Cancel Enter the password for Bticino_00 Structure PASSWORD Devices info Device language Call mode Access code Plant activation 1/1 Entrance Panel Active Connecting to the network in progress. Wait please Network Connected Report a problem...
  • Page 134 Connection through Ethernet network For UK only: Great King Street North B19 2LF 345000 (1-2) OFF RESET BTICINO SpA Viale Borri, 231 21100 VARESE ITALY Made in Italy ETHERNET 1. Connect the EP to the network using a network cable. Parameters and settings...
  • Page 135 Linea 5000 Installation and configuration manual Connecting Parameters and settings Cancel Structure Devices info Device language Call mode Access code Plant activation 1/1 Entrance Panel Active Connecting to the network in progress. Wait please Network Connected Report a problem 8. The EP is connected. GO TO THE NEXT STEP...

  • Page 136: Send Problem Details

    Linea 5000 Installation and configuration manual Send problem details This section can be used to report a problem to the after-sales service and send recorded logs directly from the device via Bluetooth. Parameters and settings Report a problem Report a problem SELECT THE ENTRANCE PANEL YOU WANT TO SEND DESCRIBE THE PROBLEM ON Structure...

  • Page 137: Configurations From Device

    Linea 5000 Installation and configuration manual Configurations from device some device settings device reset. It is possible to set and perform a Device settings Entrances/show settings on the To display this page on the device, it is necessary to complete the device procedure.
  • Page 138 Linea 5000 Installation and configuration manual Test call Test call Audio settings Call N address Now listen and speak, you can tune the parameters below to enhance the audio quality Speaker Microphone Finish 3. Enter the SCS address of the IU. 4.

  • Page 139: Volume Setting

    Linea 5000 Installation and configuration manual Volume setting This function can be used to adjust the volume of the voice guidance that generates the messages. Volume settings Product setup Set the volume for audio guide messages to assist the user Product setup Volume Test call...

  • Page 140: Device Info

    Linea 5000 Installation and configuration manual Device info This function can be used to view certain EP data. Product setup Info firmware version P address Current date (dd/mm/yyyy) 11/11/2024 Product setup Current time 09:05 Test call Wi-Fi Audio guide assist MAC Address 82:50:79:c3:d0:00 Info...

  • Page 141: Reset

    This function restores the factory values of the device. For UK only: Great King Street North B19 2LF 345000 (1-2) OFF RESET BTICINO SpA Viale Borri, 231 21100 VARESE ITALY Made in Italy ETHERNET Warning All data, configuration and updates will be erased, and the product restored to factory state.
  • Page 142 Linea 5000 Installation and configuration manual Language Setup in progress The product will be out of service until the setup is finished. It may take a while. Continue 3. Wait for the procedure to be completed. 4. When finished, the language selection screen appears: select the language. 5.

  • Page 143: Home + Project Desktop Tool

    Linea 5000 Installation and configuration manual Home + Project desktop tool The web pages can be used to perform several functions (system structure creation, device configuration, resident customisation) more conveniently and quickly from your office using a PC. Another important function, exclusive to the desktop version, is the ability to quickly configure the address book with resident data, by importing and exporting previously compiled CSV files.
  • Page 144 BTicino SpA Viale Borri, 231 21100 Varese www.bticino.com BTicino Spa reserves at any time the right to modify the contents of this booklet and to communicate, in any form and modality, the changes brought to the same.

Table of Contents