Network Problems; Microsoft ® Windows ® Error Messages - Dell Dimension 2100 Solution Manual

C H E C K T H E N E T W O R K C A B L E C O N N E C T O R
cable connector is firmly connected to the connector on the computer and the
network wall jack as shown on the
C
H E C K T H E N E T W O R K L I G H T S O N T H E B A C K O F T H E C O M P U T E R
Green indicates that the network connection is active. If the status light is not
green, try replacing the network cable.
R —
E S T A R T T H E C O M P U T E R
C
O N T A C T Y O U R N E T W O R K A D M I N I S T R A T O R
settings are correct and that the network is functioning.
®
x:\
. T
I S N O T A C C E S S I B L E
the drive and try again.
A F I L E N A M E C A N N O T C O N T A I N A N Y O F T H E F O L L O W I N G
C H A R A C T E R S : \ / : * ? " < > | —
filenames.
N
O T E N O U G H M E M O R Y O R R E S O U R C E S
— You have too many programs open. Close all windows and open
T R Y A G A I N
the program that you want to use. In some cases, you might have to restart your
computer to restore computer resources. If so, try running the program that you
want to use first.
T
H E F I L E B E I N G C O P I E D I S T O O L A R G E F O R T H E D E S T I N A T I O N
— The file that you are trying to copy is too large to fit on the disk. Try
D R I V E
copying the file to a disk or use a larger capacity disk.
— Ensure that the network
START HERE
sheet for your computer.
Try to log on to the network again.
— Verify that your network
®
H E D E V I C E I S N O T R E A D Y
Do not use these characters in
. C
L O S E S O M E P R O G R A M S A N D
—
— Insert a disk into
Solving Pr oblems 39