Dell Dimension 2100 Solution Manual page 76

76
Adding Parts
Make sure that the card is fully seated and that its bracket is within the
card slot.
fully seated
Secure the bracket on the end of the card with the screw you removed
7
in step 5.
Connect any cables required for the card as described in the card
8
documentation.
Rotate the power supply back into place (see page 64).
9
Replace the computer cover (see page 80).
10
Plug your computer and devices into their electrical outlets, and turn
11
them on.
Install any drivers required for the card as described in the card
12
documentation.
not fully seated
bracket within slot
bracket caught
outside of slot