Removing A 3.5" Drive Bezel Blank - HP dx2200 - Microtower PC Service & Reference Manual

6.4.2 Removing a 3.5" Drive Bezel Blank

While facing the inside of the front bezel, press outward on the retaining tabs on each side of the
bezel blank 1 and pull the bezel blank inwards to remove it 2.
✎
To install a 3.5" bezel blank, press the blank inward from the inside of the front bezel so that it
snaps into place.
Service Reference Guide, dx2200 MT
Removal and Replacement Procedures— Microtower (MT) Chassis
415606-001 6–5