World Wide Web Site; Security; Password Security; Establishing A Supervisor Password Using Computer Setup - HP dx2200 - Microtower PC Service & Reference Manual

3.2.4 World Wide Web Site

When making the transition to new or revised operating systems, it is important to implement the
support software designed for that operating system. If you plan to run a version of Microsoft
Windows that is different from the version included with your computer, you must install
corresponding device drivers and utilities to ensure that all features are supported and
functioning properly.
HP has made the task of locating, accessing, evaluating, and installing the latest support software
easier. You can download the software from
the latest device drivers, utilities, and flashable ROM images needed to run the latest Microsoft
Windows operating system on your HP computer.

3.3 Security

3.3.1 Password Security

The user password prevents unauthorized use of the computer by requiring entry of a password to
access applications or data each time the computer is turned on or restarted. The supervisor
password specifically prevents unauthorized access to Computer Setup, and can also be used as
an override to the user password. That is, when prompted for the user password, entering the
supervisor password instead will allow access to the computer.
A network-wide setup password can be established to enable the system administrator to log in to
all network systems to perform maintenance without having to know the power-on password,
even if one has been established.
3.3.2 Establishing a Supervisor Password Using Computer
Setup
Establishing a supervisor password through Computer Setup prevents reconfiguration of the
computer (use of the Computer Setup (F10) utility) until the password is entered.
1. Turn on or restart the computer. If you are in Windows, click Start > Shut Down > Restart.
2. As soon as the computer is turned on, press and hold the
Setup. Press
✎
If you do not press the
again, and press the
3. Select Set Supervisor Password and follow the instructions on the screen.
4. Before exiting, click Save and Exit Setup.

3.3.3 Establishing a User Password Using Computer Setup

Establishing a user password through Computer Setup prevents access to the computer when
power is turned on, unless the password is entered. When a user password is set, Computer Setup
presents Password Options under the Security menu. Password options include Password
Prompt on Warm Boot. When Password Prompt on Warm Boot is enabled, the password
must also be entered each time the computer is rebooted.
1. Turn on or restart the computer. If you are in Windows, click Start > Shut Down > Restart.
Service Reference Guide, dx2200 MT
Enter
to bypass the title screen, if necessary.
F10
key at the appropriate time, you must turn the computer off, then on
F10
key again to access the utility.
415606-001
http://www.hp.com/support
F10
key until you enter Computer
Desktop Management
. The Web site contains
3–3