HP dx2200 - Microtower PC Service & Reference Manual page 18

Setup Utilities and Diagnostics Features
Heading Option
Integrated Onboard Serial
Peripherals Port
(continued)
Onboard Parallel
Port
Parallel Port Mode
ECP Mode Use
DMA
Power After AC Power
Management Loss
Setup
ACPI Suspend
Type
External Modem
S5 Wake-Up
RTC Alarm Resume
Date (of Month)
Resume Time
(hh:mm:ss)
PnP/PCI Reset
Configuration
Configurations
Data
2–8
Allows you to select a setting for the onboard serial port:
• Disabled
• 3F8/IRQ4
• 2F8/IRQ3
• 3E8/IRQ4
• 2E8/IRQ3
Allows you to select a setting for the onboard parallel port:
• Disabled
• 378/IRQ7
• 278/IRQ5
• 3BC/IRQ7
Allows you to select parallel port mode:
• SPP
• EPP
• ECP
• ECP+EPP
• Normal
If Parallel Port Mode is set to ECP or ECP+EPP, allows you to set
the DMA channel for ECP Mode to 1 or 3.
Allows you to select system power loss behavior:
• On
• Off
• Last State
ACPI sleep mode is S3 (Suspend To RAM)
Disables/enables wake-up modem from S5.
Disables/enables RTC alarm.
If RTC Alarm Resume is enabled, allows you to select the day of
the month for resumption of RTC alarm. (Set to 0 for every day.)
If RTC Alarm Resume is enabled, allows you to select what time
the RTC alarm will resume.
Disables/enables automatic reconfiguration.
The default is Disabled. Select Enabled to reset Extended
System Configuration Data (ESCD) when you exit Setup, if you
have installed a new add-on and the system reconfiguration has
caused such a serious conflict that the OS cannot boot.
415606-001
Description
Service Reference Guide, dx2200 MT