HP dx2200 - Microtower PC Service & Reference Manual page 16

Setup Utilities and Diagnostics Features
Heading Option
Standard POST Delay
CMOS
Features
(continued)
Advanced Device Boot
BIOS Features Disabling
F9 Boot Menu
Removable Device
Boot Priority
Hard Disk Boot
Seq.
Optical Drive Boot
Sequence
Network Boot
Sequence
First Boot Device
Second Boot
Device
Third Boot Device
Fourth Boot Device
Boot Up NumLock
Status
2–6
Allows you to set a POST delay to:
• 0 seconds
• 5 seconds
• 10 seconds
• 15 seconds
• 30 seconds
Allows you to restrict a device from booting the unit. You can
disable as a bootable device:
• None
• USB
• Internal ODD
• Internal FDD
• USB + ODD + FDD
Disables/enables F9 Boot Menu
Allows you to specify the order of attached removable devices
(such as Legacy Floppy or USB FDD) The first drive in the order
has priority in the boot sequence and is recognized as drive A.
Allows you to specify the order of attached hard drive devices
(such as USB HDD storage, USB2 Drive Key, or USB flash
media). The first drive in the order has priority in the boot
sequence and is recognized as drive C (if any devices are
attached).
Allows you to specify the order in which attached optical drives
(including USB ODD) are checked for a bootable operating
system image.
Allows you to specify the order in which network devices
(including UP NIC cards) are checked for a bootable operating
system image.
Allows you to specify which devices will boot first, second, third,
and fourth or to disable any of the three:
• Removable
• Hard Disk
• Optical Drive
• Network
• Disabled
✎
MS-DOS drive lettering assignments may not apply after a
non-MS-DOS operating system has started.
Allows you to set the default NumLock status to off or on.
415606-001
Description
Service Reference Guide, dx2200 MT