Sleep Function; Watersave Function; Swing Function - DeLonghi PAC W130E Instructions For Use Manual

SLEEP
FUNCTION
This function is ideal for the night as it gradually reduces opera-
tion of the appliance.
To set this function correctly:
• Press the button. The appliance operates in the previously
selected mode with low fan speed.
The SLEEP function maintains the room at optimum temperature
without excessive fluctuations in either temperature or humidity
and with silent operation.
Fan speed is always at minimum, while room temperature and
humidity vary gradually to ensure the most comfortable condi-
tions.
During air conditioning, the temperature increases by 2°F (1°C)
after 60 minutes and 4°F (2°C) after 2 hours.
In dehumidifying mode, the dehumidifying power of the applian-
ce is partially reduced every hour for the first two hours.
WATERSAVE
This function is designed to increase the operating time of the
appliance when operating in water mode and can be activated
in air conditioning and SMART mode.
When the button is pressed, the appliance is slightly less efficient,
but consumption of water in the tank is considerably reduced.
With a full tank, the appliance normally operates for six hours.
With this function activated, the operating time increases to 10
hours avoiding the need to refill the water tank frequently.
If the water runs out when this function is active, the quantity of
air given out from the rear hose increases and the
comes on. To restore operation in water mode, fill the tank.
SWING
FUNCTION
Not available in these models.
( . 25)
FIG
( . 26)
FUNCTION FIG
light
13
25
26