Icom IC-M9 Instruction Manual page 20

E
E
S TROUBLESHOOTING AND CHANNEL LIST
E Troubleshootin
No power comes ON.
—_ POSSIBLE CAUSE
e The battery is exhausted.
e Bad connection to the battery pack.
e Recharge the battery pack.
e Set [SQL] to the threshold point.
e Disconnect the external speaker or earphone.
e Set [VOL] to a suitable level.
e [SQL] is turned too far CW.
e External speaker or earphone is in use.
e [VOL] is turned completely CCW.
No sound comes from the
speaker.
e Change channels.
e Replace or charge the batteries.
e Push [HI/LOW] to select high output power.
e While pushing [HI/LOW}, push [LIGHT/LOCK].
e Push [16] to return to normal operation.
| ٥ Push [DW(SCAN)] to cancel dual/tri-watch.
e Channels 15 and 17 are for low power only.
e The battery is exhausted.
e The output power is set to low.
Transmitting is impossible, or
high power cannot be se-
lected.
e Lock function is activated.
e Channel 16 mode has been selected.
e Dual/tri-watch has been activated.
p.14
Scanning
or dual watch/tri- | ٥ Channel 16 mode has been selected.
e Push [16] to return to normal operation.
p. 8
watch does not function.
e The squelch is open.
e Rotate [SQUELCH] clockwise.
p. 14
Memory scan does not func- | ٥2 or more
memory
channels must be pro- | e Program 2 or more memory channels with chan-
tion
. grammed with channel information
nel information
Dual watch functions but tri- | e You must set the transceiver to operate one or | e Select dual watch or tri-watch operation in SET
watch doesn't or vice versa.
the other.
mode.
e Voice scrambling code has not been set cor-
rectly (when the scrambler has been turned
ON.)
The displayed channel can-
not be changed.
e Reset the scrambling code. p. 16