Removing The Computer Cover - Compaq 470022-515 - Evo - D300 Hardware Reference Manual

Removing the Computer Cover

Hardware Reference Guide
To remove the computer cover:
1. Shut down the operating system properly, then power off the
computer and any external devices.
2. Disconnect the power cord from the power outlet, and disconnect
any external devices.
CAUTION: Before removing the computer cover, ensure that the computer
is turned off and that the power cord is disconnected from the electrical
outlet.
3. Loosen the two captive thumbscrews that secure the cover to the
computer chassis.
4. Slide the cover back about 1 inch (2.5 cm), then lift it up and off
the unit.
Removing the Computer Cover
Hardware Upgrades
2-3