Installing The Cooling Shroud - Dell PowerEdge XK946 Hardware Owner's Manual

Figure 3-9. Removing the Cooling Shroud
1
1 Cooling shroud
3 Chassis slot

Installing the Cooling Shroud

NOTICE:
When installing the cooling shroud, ensure that the shroud does not
damage system cabling.
1 Ensure power is removed.
2 Open the system. See "Removing the Top Cover" on page 60.
3 Position the shroud guides above the slots in the chassis.
4 Gently press the cooling shroud down into place.
2
2
Installing System Components
Finger holds
3
77