Processor Power Module - Compaq 234664-002 - ProLiant - ML330T02 Maintenance And Service Manual

Removal and Replacement Procedures

Processor Power Module

To remove a Processor Power Module, open the latches of the Processor Power Module
(PPM) (1), and then remove the PPM (2) from the slot.
NOTE: The PPM for Processor 1 is integrated on the system board and cannot be removed.
1
2
1
Figure 2-27: Removing the PPM (Processor Power Module) for
processor 2
To replace the PPM, reverse the previous step.
Compaq ProLiant ML330 Generation 2 Server Maintenance and Service Guide 2-35
COMPAQ CONFIDENTIAL Codename: Mimic/Reaper Part Number: 234832-003 Last Saved On: 11/25/02 10:18 AM