Removing A Hard Drive Compartment - Compaq 234664-002 - ProLiant - ML330T02 Maintenance And Service Manual

Removing a Hard Drive Compartment

To remove a hard drive compartment:
1. Complete the preparation procedures. Refer to "Preparation Procedures" earlier in this
chapter.
2. Remove the front bezel door. Refer to "Front Bezel" earlier in this chapter.
3. Remove the access panel. Refer to "Access Panel" earlier in this chapter.
4. Disconnect the power and data cables from the back of all devices in the hard drive
compartment being removed.
Figure 2-12: Disconnecting power and data cables from
the ATA hard drive compartment
Compaq ProLiant ML330 Generation 2 Server Maintenance and Service Guide
COMPAQ CONFIDENTIAL Codename: Mimic/Reaper Part Number: 234832-003 Last Saved On: 11/25/02 10:18 AM
Removal and Replacement Procedures
2-17