Removal and Replacement Procedures
Internal Fan Baffle
To remove the internal fan baffle:
1. Complete the preparation procedures. Refer to "Preparation Procedures" earlier in this
chapter.
2. Remove the front bezel. Refer to "Front Bezel" earlier in this chapter.
3. Remove the access panel. Refer to "Access Panel" earlier in this chapter.
4. Loosen the shipping screw that secures the baffle to the fan, if necessary (1).
5. Slide the baffle out and away from the chassis (2).
Figure 2-5: Removing the internal fan baffle
To replace the internal fan baffle, reverse steps 2 through 5.
2-10
COMPAQ CONFIDENTIAL Codename: Mimic/Reaper Part Number: 234832-003 Last Saved On: 11/25/02 10:18 AM
1
Compaq ProLiant ML330 Generation 2 Server Maintenance and Service Guide
2