Expansion Board Guide - Compaq 234664-002 - ProLiant - ML330T02 Maintenance And Service Manual

Expansion Board Guide

To remove the expansion board guide:
1. Complete the preparation procedures. Refer to "Preparation Procedures" earlier in this
chapter.
2. Remove the front bezel. Refer to "Front Bezel" earlier in this chapter.
3. Remove the access panel. Refer to "Access Panel" earlier in this chapter.
4. Remove all expansion boards supported by the board guide.
5. Push in the four locking tabs (1), and then pull the guide back and away from chassis (2).
Figure 2-21: Removing the expansion board guide
To replace the expansion board guide, reverse steps 2 through 5.
Compaq ProLiant ML330 Generation 2 Server Maintenance and Service Guide
COMPAQ CONFIDENTIAL Codename: Mimic/Reaper Part Number: 234832-003 Last Saved On: 11/25/02 10:18 AM
2
Removal and Replacement Procedures
1
1
1
1
2-29