Tektronix SC 501 Instruction Manual page 9

Performance Requirements
Calibrated Sweep Rates
Uncalibrated (Variable) Range
X5 Magnifier (fixed)
Accuracy (Over 8 div)
1 ms/div, 10 ms/div, 100 ms/div, 1 us/div,
10 us/div, 100 us/div.
1 sec/div.
Extends fastest calibrated sweep rate to
length.
portion within center length.
position.
Maximum Input Voltage +3 V.
Performance Requirements
Normal Trigger Sensitivity (Trigger
LEVEL/SLOPE control pushed in)
External: Dce-coupled
Input Impedance
0.4 major division of deflection at dc
increasing to 1.0 major division of
to 5 MHz.
150 pF.
SLOPE control pulled to out
signal or for trigger repetition rates below
10 Hz.
146