Installing The Power Supply - Dell POWEREDGE E11S Owner's Manual

Figure 3-22. Removing and Installing the Power Supply
1
4
1 power supply
3 cable clip

Installing the Power Supply

CAUTION:
Many repairs may only be done by a certified service technician. You
should only perform troubleshooting and simple repairs as authorized in your
product documentation, or as directed by the online or telephone service and
support team. Damage due to servicing that is not authorized by Dell is not covered
by your warranty. Read and follow the safety instructions that came with the
product.
1 Attach the cable clip to the new power supply.
2 Align the power supply mounting holes with the mounting holes on the
back panel.
3 Slide the power supply toward the back panel until it snaps into place over
the power-supply release tab.
4 Using a #2 Phillips screwdriver, install the four screws that secure the
power supply to the back panel.
3
2 screws (4)
4 power-supply release tab
Installing System Components
2
87