Dell POWEREDGE E11S Owner's Manual page 54

Figure 3-7. Removing and Installing an Optical Drive (SATA Connection)
5
4
1 power/data cable
3 drive bay screw slots
5 optical drive shoulder screws (3)
6 If you are installing another drive in the bay, see "Installing an Optical or
Tape Drive" on page 55.
7 If the drive is being permanently removed, install an insert on the front
bezel. See "Installing Front-Bezel Insert" on page 50.
8 Replace the front bezel. See "Installing the Front Bezel" on page 48.
9 Close the system. See "Closing the System" on page 46.
54
Installing System Components
3
2 drive release latch
4 optical drive
1
2