Figure 3-9. Removing and Installing a 3.5-Inch Hard Drive
1
hard drive
3
tabs (2)
NOTE:
bracket (see Figure 3-11) and insert the empty bracket back into the drive bay.
5 Detach the hard-drive bracket from the hard drive by pushing out at the
edges of the bracket and removing the hard drive. See Figure 3-11.
6 Close the system. See "Closing the System" on page 46.
58
Installing System Components
1
If you are not replacing the hard drive, remove the drive from the drive
2
2
power/data cable
4
hard drive bracket
3
4