Installing Memory Modules - Dell POWEREDGE E11S Owner's Manual

Figure 3-17. Removing and Installing a Memory Module
1 memory module
3 alignment key

Installing Memory Modules

WARNING:
has been powered down. Allow time for the memory modules to cool before
handling them. Handle the memory modules by the card edges and avoid touching
the components on the memory module.
CAUTION:
should only perform troubleshooting and simple repairs as authorized in your
product documentation, or as directed by the online or telephone service and
support team. Damage due to servicing that is not authorized by Dell is not covered
by your warranty. Read and follow the safety instructions that came with the
product.
CAUTION:
installed in any memory socket that is not occupied. Remove memory-module
blanks only if you intend to install memory in those sockets.
1 Turn off the system, including any attached peripherals, and disconnect
the system from the electrical outlet and peripherals.
2 Open the system. See "Opening the System" on page 45.
76
Installing System Components
The memory modules are hot to touch for some time after the system
Many repairs may only be done by a certified service technician. You
To ensure proper system cooling, memory-module blanks must be
3
2 memory module socket ejectors (2)
1
2