sweeek. MAXIM Manual page 30

EN
SWITCHING THE PRINCIPAL BURNERS
1. Open the lid and ensure that all the buttons of the burners are in the « OFF » position.
2. Connect the regulator to the gas canister and open the outlet. Do a test for leaks using a soapy
solution throughout all of the gas circuit.
3. Push the control button, identifiable by the lightning symbol
MAX ». By doing so, the ignition should spark and light the principal burner.
4. You can light the other burners by repeating the previous steps.
5. If the lighting process doesn't work, turn the button to « OFF », wait a few moments, and repeat
step 3.
6. Adjust the flame to the desired strength by using the control button.
7. To turn the barbecue off, turn the gas or the regulator off directly, and turn all controls back to
« OFF ».
WARNING:
closed and all the burners on « MAX ». Doing this will clean all the elements of any residue left
during the production process.
WARNING:
SWITCHING THE SECONDARY BURNER
1. Open the lid.
2. Push the control button marked with the lightening symbol and position it to « MAX ».
3. If the burner doesn't light in 5 seconds, put the switch to « OFF » and repeat step 2.
4. If the starter doesn't work, turn the button back to « OFF », wait a few minutes and repeat 2.
5. To turn the BBQ off, turn the gas off at the canister or the regulator and turn all controls to « OFF ».
SWITCHING YOUR BARBECUE OFF
1. Shut the gas valve, directly at the cylinder.
2. Then, when the flames are extinguished, turn all the switches « OFF ».
3. For maximum safety when not in use, you can also disconnect the pipe from the gas cylinder.
30
Before cooking the first item, let the bbq heat up for 15 minutes, keep the lid
If you smell gas, turn off the gas source and lift the lid of the barbecue.
and at the same time turn it to «
15/11/2024