Unpack the printer memory card.
2
Avoid touching the connection points along the edge of the card. Save the packaging.
Align the notches on the bottom of the card with the notches on the connector.
3
Guide the card between the latches on each end of the connector and push the card
4
firmly into the connector.
Make sure each latch fits over the notch on each end of the memory card.
5
Reattach the metal shield and side cover. See page 31 for instructions.
6
3 0
In stal l opt ional memor y card s
Connection points
Notches
Latch
Latch