Lift the system board shield up over the screws, slide it toward the front of the printer,
3
and set it aside.
Installing a memory card
Follow the instructions in this section to install either a printer memory card or a flash
memory card.
The system board has two connectors for optional memory cards. You can install a card in
either connector.
NOTICE: Memory cards are easily damaged by static electricity. Touch something metal on the
printer before you touch a memory card.
Complete the steps in "Removing the system board shield" on page 28.
1
Ins ta l l o p tio n a l m e m o r y c a r d s
29