Changing The Language On The Operator Panel; Using The Operator Panel To Change Printer Settings - Dell M5200 Owner's Manual

Changing the language on the operator panel

To display a different language on the operator panel:
Press and release Menu until you see Setup Menu, and then press Select.
1
Press and release Menu until Display Language appears, and then press Select.
2
Scroll through the languages to choose the one you want, and then press Select.
3
Using the operator panel to change printer
settings
The diagram on page 59 shows the menu items in each menu. For detailed explanations of
the menus, refer to the User's Guide (Start
Printer M5200
You can select menu items and corresponding values from the operator panel. When you
first enter the printer menus from the operator panel, you see an asterisk (*) next to a value
in the menus. This asterisk indicates the factory default setting. These settings are the
original printer settings. (Factory defaults may vary for different countries.)
When you select a new setting from the operator panel, the Saved message appears.
When the Saved message disappears, an asterisk appears next to the setting to identify it as
the current user default setting. These settings are active until new ones are selected or the
factory defaults are restored.
To select a new value as a setting:
Make sure the printer is on and the Ready message appears on the display.
1
Press the Menu button on the printer. The menu names appear.
2
Continue to press and release Menu until you see the menu you need.
3
Press Select to select the menu or menu item on the second line of the display.
4
•
•
5 6 Us e y o u r p ri nt e r
User's Guide).
If the selection is a menu, the menu is opened and the first printer setting in the
menu appears.
If the selection is a menu item, the default setting for the menu item appears.
(The current user default setting has an asterisk [*] beside it.)
Programs Dell Printers Dell Laser