Dell M5200 Owner's Manual page 37

Using Windows XP
NOTE: Business versions of Windows XP require that you have administrative access to install
printer drivers on your computer.
When you attached the cable and turned on the printer, the Found New Hardware Wizard
appeared on your computer screen.
Insert the Drivers and Utilities CD into your computer.
1
The Wizard automatically searches for an appropriate driver.
Scroll through the list of drivers until you see D:\drivers\win_2000\dkaag1da.inf
2
selected in the Location column. Instead of D:\ you will see the letter of your
CD-ROM drive.
Click Next.
3
The wizard copies all of the necessary files and installs the printer drivers.
Click Finish when the software is installed.
4
Launch the Drivers and Utilities CD: click Start
5
example, type D:\ where D is the drive letter of your CD).
Select SETUP .EXE, and then click OK.
6
When the Dell Drivers and Utilities CD screen appears, click Install the printer for
7
Use on this Computer only (Personal Installation) to install the additional software
for your printer.
When all of the files are installed on your computer, the Congratulations screen
appears.
Click Print a Test Page to verify printer setup.
8
Click Finish when the test page prints successfully.
9
Click Exit on the Drivers and Utilities CD screen.
10
Run and browse your CD drive (for
Se t up fo r l ocal pri nti ng
37