Netware Printing - Ricoh Priport HQ9000 Network Manual

Appendix
When Using Network Utility
If the printer is connected to a network, observe the following points when set-
ting up the printer or changing settings:
For more details, see the operating instructions and Help for DeskTopBinder
Lite/professional.
❖ When a dial-up router is connected in a network environment
The settings for the delivery server to be connected must be made appropri-
ately for the printer with Auto Document Link, or DeskTopBinder Lite/pro-
fessional. In addition.
If the network environment changes, make the necessary changes for the de-
livery server using the printer, the administration utility of client computers,
Auto Document Link, and DeskTopBinder Lite/professional.
Important
❒ If the printer is set up to connect to the delivery server via a dial-up router,
the router will dial and go online whenever a connection to the delivery
server is made. Telephone charges may be incurred.
❖ When connected to a computer that uses dial-up access
• When using DeskTopBinder Lite/professional, or Auto Document Link on
a computer with dial-up access, a dial-up connection may be performed
when connecting to the delivery server and other equipment, depending
on the setup. If the computer is set up to connect to the Internet automati-
cally, the confirmation dialog box will not appear, and telephone charges
may be incurred without your being aware of it. To prevent unnecessary
connections, the computer should be set up so the confirmation dialog box
always appears before establishing a connection. Do not make unneces-
sary connections when using the above listed software.
9

NetWare Printing

Form feed
You should not configure form feed on NetWare. Form feed is controlled by the
printer driver on Windows. If NetWare form feed is configured, the printer
might not work properly. If you want to change form feed settings, always con-
figure them using Windows.
• Under Windows 95/98/Me, clear the [Form feed] check box on the [Printer Set-
tings] tab in the [Printer Properties] dialog box.
• Under Windows 2000/XP, clear the [Form feed] check box on the [NetWare Set-
tings] tab in the [Printer Properties] dialog box.
• Under Windows NT 4.0, clear the [Form feed] check box on the [NetWare Set-
tings] tab in the [Printer Properties] dialog box.
118